Siemens SIRIUS 3RH Series Скачать руководство пользователя страница 148

Страница: 148 / 786

SIRIUS 3RT2 contactors/contactor assemblies

2.5 Mounting

SIRIUS Innovations

148

System Manual, 01/2011, A8E56203870002-03

2.5

Mounting

2.5.1

Mounting

2.5.1.1

Mounting options

Note the following information when mounting contactors:
●

If foreign bodies (such as drillings) can reach the devices, the contactors must be

covered during mounting.

●

If there is a risk of pollution, heavy dust deposits, or an aggressive atmosphere at the

mounting location, the contactors must be installed in an enclosure.

●

Dust deposits must be vacuumed away.

Mounting options

The following mounting types are available for contactors in sizes S00 and S0:
●

Snapping onto a 35 mm DIN rail according to DIN EN 60715.

●

Screwing onto a mounting plate

2.5.1.2

Mounting position

The contactors are dimensioned for operation on a vertical mounting plane. The following

mounting positions are permitted:

Table 2- 18 Permissible mounting positions for the contactors

Mounting positions for sizes S00 and S0

Note
A lateral distance from grounded parts of over 6 mm must be observed.

Vertical mounting

A special version of the 3RH2 contactor relays and 3RT2 power contactors is required for

vertical mounting. This special version can be requested from Technical Assistance

Содержание SIRIUS 3RH Series



















































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SIRIUS 3RH Series

Отзывы:

Бренды по названию

Популярные бренды

Siemens SIRIUS 3RH Series, Системное руководство

Результаты поиска

Содержание SIRIUS 3RH Series

Отзывы:

Бренды по названию

Популярные бренды