2 - 1
Siemens AG
SPR2-130.814.01
Page 1 of 14
SIREMOBIL Compact
Medical Solutions
Rev.01_V 03.01
TD PS 24
System Manual
Installation
2
With prepared monitor trolley (new delivery)
2
Requirements
2
•
The mounting plates for the framegrabber are already fitted in the monitor trolley.
•
The guide rails for the printer, including the fan, are already fitted in the monitor trolley.
•
The cables for the video printer are already installed in the monitor trolley.
Unpacking the printer
2
•
Turn the box with the printer upside down and open the bottom of the box.
•
Remove the foam material.
•
Remove the plastic bag.
•
Unscrew the wooden base plate.
•
Lift the printer carefully out of the box and place it on the floor in the upright position.
•
Turn the two transport locks into vertical position and pull out in vertical position
(Fig. 1).
Fig. 1
Keep the two transport locks. If the printer needs to be replaced
or sent in, the transport locks must be re-inserted.
NOTICE
