Siemens SIREC DS 7ND4120 Series, Руководство пользователя, Страница: 23 / 116

43-TV-25-20 GLO Issue 4 01/02 UK 15
A5E00117351-04
Chapter 2: Installation
Unpacking
It is advisable to retain the packaging in which your
SIREC DS
recorder arrived,
should the recorder need to be returned.
NB. Should the original packing be destroyed, then ONLY pack the recorder in pol-
ystyrene granules if the recorder is FIRST sealed in a strong plastic bag, failing to
do this will invalidate your warranty.
For transportation information see “Instrument Care” on page 79.
Battery
The
SIREC DS
battery does not require any charging prior to use. There is a bat-
tery switch located on the side of the unit, see “Case” on page 18 . With the bat-
tery switched on and the recorder power off, the battery will last for 6 months, with
the battery and recorder power on, the battery should last for up to 10 years.
Mechanical
The
SIREC DS
units are panel mounted as shown below. The recorder slides
into the panel cut-out from the front and is held in place by two mounting clamps
pressed against the rear of the panel by two screws.
NB: For panel cutout size See “Specifications” on page 6.
Mount this
way up
144.00
(5.67”)
144.00
(5.67”)
19.00
(1.89”)
215.00 min
(8.465”)
234.00 min
(9.213”)