Siemens SIREC D200 Скачать руководство пользователя страница 239 | Manualshive

Страница: 239 / 286

Siemens SIREC D200 Скачать руководство пользователя страница 239

43-TV-25-35 GLO Iss.4 Dec 06 UK

233

A5E01001767-04

Appendix B: Maths Expressions

Full Maths & Script Processing

The

SIREC D200, D300 and D400

recorders are supplied with Basic Maths functions:

Add, Subtract, Divide and Multiply. There are two further options that can be added, Full
Maths and an extremely powerful Scripting processing module. Scripting delivers an
additional level of enhanced capabilities with multi line script processing. Full and Script-
ing Maths must be activated in the recorder as a Firmware credit option. (Scripting is not
available on the

SIREC D200

).

When a recorder setup is loaded into the

SIREC D

software the Maths capabilities will be

transferred with the setup. If you are creating a new recorder in

SIREC D

software to be

transferred to a recorder the Maths capabilities will be available but will only become ac-
tive if the recorder has the same Maths functions enabled.

This document provides the Maths Variable and Function table and examples of the capa-
bilities from the simple to the complex to assist the user in understanding the concepts and
potential of these features.

*** Important Note, Full Maths and Script functions are Options and must be enable using
the Credit System. Be sure to enable these options or they will not be available.

ware Credit System” on page 167.

Notes:

• if, elseif & else are followed by expressions in “curly brackets” {….}

• lines within the curly brackets always end in semicolon e.g. ;

• every execution path must have a return statement. As soon as a return is executed the

script finishes; make sure that the return is the last operation to be executed.

• every expression within curly brackets “{…}” must include a “return”

• Small values (fractions) entered into a maths expression will require a zero before the deci-

mal point. Eg. 0.5. Decimal point and not comma must be used always.

• Outputs that are set to Single Pulse should not be used as a part of a maths expression as

it can cause spurious values.

• No white spaces

• Syntax is not case sensitive

• 500 character limit for scripting

Maths Credit Options

Full Maths firmware credit option will allow the functions listed in

Table 14.1 on

Table 14.2 on page 235

.

NOTICE

Full Maths and Scripting functions are Options and must be enabled using the
Credit System. Be sure to enable these options in the recorder or they will not be
available.

See “Firmware Credit System” on page 167.

«
...
237
238
239
240
241
...
»

Содержание SIREC D200































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды