Siemens SIPROTEC 7VE61, Руководство пользователя

Страница: 15 / 34

0RGEXVUHJLVWHUPDS
1-5
SIPROTEC Modbus - Bus mapping 7VE61, 7VE63
C53000-L1840-C017-03
5HJLVWHUVWR,QWHUQDOFRPPDQGV
5HJLVWHU
'HVLJQDWLRQRIWKH
6,3527(&REMHFWV
&RPPHQWV
,QWHUQDO
REMHFWQR
00045
Command: Setting Group A
0 = not permitted
1 = Activation of setting group A
-
Indication: Setting Group A
0 = Setting group A is not active
1 = Setting group A is active
00046
Command: Setting Group B
0 = not permitted
1 = Activation of setting group B
-
Indication: Setting Group B
0 = Setting group B is not active
1 = Setting group B is active
00047
Command: Setting Group C
0 = not permitted
1 = Activation of setting group C
-
Indication: Setting Group C
0 = Setting group C is not active
1 = Setting group C is active
00048
Command: Setting Group D
0 = not permitted
1 = Activation of setting group D
-
Indication: Setting Group D
0 = Setting group D is not active
1 = Setting group D is active
&KDQJLQJWKHVHWWLQJJURXS
•
In order to change the setting group, the value "1" = ON must be transmitted to the
corresponding register.
•
Switching ON one setting group automatically switches OFF the current active set-
ting group.
•
Transmission of the value "0" = OFF is insignificant for the change of the setting
group and is refused by the device.
1RWH
A change of the setting group is only possible via Modbus if the parameter
&KDQJH
WR$QRWKHU6HWWLQJ*URXS
(parameter address = 302) has the value
3URWRFRO
.