Siemens SIPROTEC 7SC805, Руководство пользователя, Страница: 141 / 158

Appendix
A.8 Settings
SIPROTEC, 7SC805, Manual
C53000-G1140-C380-1, Release date 05.2014
141
A.8 Settings
Addresses which have an appended "A" can only be changed with DIGSI, under "Display Additional Settings".
The table indicates region-specific default settings. Column C (configuration) indicates the corresponding sec-
ondary nominal current of the current transformer.
Addr. Parameter Function C Setting Options Default Setting Comments
104 OSC. FAULT REC. Device Configuration Disabled
Enabled Disabled Oscillographic Fault Records
357 SMV-Stop Device Configuration Yes
No No SMV-Stop
369 VT Con Type Device Configuration Conventional
Cap. Volt.Meas. Conventional Voltage Connection type
459 SysConMUConf Device Configuration Disabled
Enabled Enabled MU Configuration via IEC61850
Configurator
461 PhaseIndepRatio Device Configuration Disabled
Enabled Disabled Phase Independent Ratio
202 Vnom PRIMARY P.System Data 1 0.10 .. 800.00 kV 20.00 kV Rated Primary Voltage
203 Vnom SECONDARY P.System Data 1 34 .. 400 V 100 V Rated Secondary Voltage (L-L)
204 CT PRIMARY P.System Data 1 10 .. 50000 A 400 A CT Rated Primary Current
205 CT SECONDARY P.System Data 1 1A
5A 1A CT Rated Secondary Current
214 Rated Frequency P.System Data 1 50 Hz
60 Hz 50 Hz Rated Frequency
217 Ignd-CT PRIM P.System Data 1 1 .. 50000 A 400 A Ignd-CT rated primary current
218 Ignd-CT SEC P.System Data 1 1A
5A 1A Ignd-CT rated secondary current
325 Vnom sec Vx P.System Data 1 34 .. 230 V 100 V Rated Secondary Voltage Vx
333 Vnom prim Vx P.System Data 1 0.10 .. 800.00 kV 20.00 kV Rated Primary Voltage Vx
352 U4 inverting P.System Data 1 YES
NO NO U4 inverting
403 MAX. LENGTH Osc. Fault Rec. 0.30 .. 6.00 sec 2.00 sec Max. length of a Waveform
Capture Record
404 PRE. TRIG. TIME Osc. Fault Rec. 0.05 .. 0.50 sec 0.25 sec Captured Waveform Prior to
Trigger
405 POST REC. TIME Osc. Fault Rec. 0.05 .. 0.50 sec 0.10 sec Captured Waveform after Event
406 BinIn CAPT.TIME Osc. Fault Rec. 0.10 .. 5.00 sec;

0.50 sec Capture Time via Binary Input
407 VLAN ID Merging Unit 0...4095 1 VLAN ID
408 VLAN Priority Merging Unit 1...7 4 VLAN Priority
438 PPS Delay Merging Unit 0 μ s, 0.1 μ s...5000.00 μ s 0.0 μ s PPS Delay
460 PPS Synchro Merging Unit On
OFF ON PPS Synchronization
440A Overflo Quality Merging Unit False False Quality bit: Overflow
441A OutRang Quality Merging Unit Set By MU
True
False Set By MU Quality bit: OutofRange
(Options True and False for test
purpose)
442A BadRef Quality Merging Unit False False Quality bit: BadReference
443A Oscill Quality Merging Unit False False Quality bit: Oscillatory
444A Failure Quality Merging Unit Set By MU
True
False Set By MU Quality bit: Failure
(Options True and False for test
purpose)
445A OldData Quality Merging Unit False False Quality bit: OldData
446A Inconsi Quality Merging Unit False False Quality bit: Inconsistent
447A Inaccu Quality Merging Unit Set By MU
True
False Set By MU Quality bit: Inaccurate
(Options True and False for test
purpose)
448A Test Quality Merging Unit Set By MU
True
False Set By MU Quality bit: Test
(Options True and False for test
purpose)
449A OpeBloc Quality Merging Unit False False Quality bit: OperatorBlocked