Siemens SIPROTEC 7SA511, Инструкция по эксплуатации

Страница: 285 / 326

$SSHQGL[ 6$
9
&*&
¿©©©©§©©©©©©©©©©©©©§©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©§©©§©©§©§©©©¤
˜FNo.˜Abbreviation ˜ Meaning ˜Op˜Ft˜E˜IOT˜
¨©©©©ª©©©©©©©©©©©©©ª©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©ª©©ª©©ª©ª©©©™
˜ 159˜LSA disrupted˜LSA (system interface) disrupted ˜CG˜ ˜ ˜ ˜
˜ 161˜I supervision˜Measured value supervision of currents ˜ ˜ ˜ ˜ O ˜
˜ 162˜Failure ÉI ˜Failure: Current summation supervision ˜CG˜ ˜ ˜ OT˜
˜ 163˜Failure Isymm˜Failure: Current symmetry supervision ˜CG˜ ˜ ˜ OT˜
˜ 164˜U supervision˜Measured value supervision of voltages ˜ ˜ ˜ ˜ O ˜
˜ 165˜Failure ÉUp-e˜Failure: Voltage sum superv. (ph-e) ˜CG˜ ˜ ˜ OT˜
˜ 166˜Failure ÉUp-p˜Failure: Voltage sum superv. (ph-ph) ˜CG˜ ˜ ˜ OT˜
˜ 167˜Failure Usymm˜Failure: Voltage symmetry supervision ˜CG˜ ˜ ˜ OT˜
˜ 168˜Failure Umeas˜Failure: Measuring voltages absent ˜CG˜ ˜ ˜ OT˜
˜ 169˜Fuse-Failure ˜Fuse failure monitor operated (>10s) ˜CG˜ ˜ ˜ OT˜
˜ 170˜FFM pick-up ˜Fuse failure monitor pick-up ˜CG˜ ˜ ˜ ˜
˜ 171˜Fail.PhaseSeq˜Failure: Phase sequence supervision ˜CG˜ ˜ ˜ OT˜
˜ 203˜Flt.RecDatDel˜Fault recording data deleted ˜C ˜ ˜ ˜ ˜
˜ 204˜Flt.Rec.viaBI˜Fault recording initiated via bin.input˜C ˜ ˜ ˜ ˜
˜ 205˜Flt.Rec.viaKB˜Fault recording initiated via keyboard ˜C ˜ ˜ ˜ ˜
˜ 206˜Flt.Rec.viaPC˜Fault recording initiated via PC interf˜C ˜ ˜ ˜ ˜
˜ 244˜D Time= ˜Diff. time of clock synchronism ˜ M˜ ˜ ˜ ˜
˜ 301˜Syst.Flt ˜Fault in the power system ˜CG˜C ˜ ˜ ˜
˜ 302˜Fault ˜Flt. event w. consecutive no. ˜ ˜C ˜ ˜ ˜
˜ 303˜E/F Det. ˜E/Flt.det. in isol/comp.netw. ˜CG˜ ˜E˜ ˜
˜ 354˜>CB Aux.3p cl˜>CB aux. contact:3poles closed (series)˜ ˜ ˜ ˜IOT˜
˜ 356˜>Manual Close˜>Manual close ˜ ˜ ˜ ˜IOT˜
˜ 357˜>CloseCmd.Blo˜>Block all close commands from external˜CG˜ ˜ ˜IOT˜
˜ 361˜>VT mcb Trip ˜>U Line side VT MCB tripped ˜CG˜ ˜ ˜IOT˜
˜ 362˜>V2 mcb Trip ˜>U2 Busbar side VT MCB tripped ˜CG˜ ˜ ˜IOT˜
˜ 381˜>1p Trip Perm˜>External auto-reclose ready for 1pole ˜CG˜ ˜ ˜IOT˜
˜ 382˜>Only 1pole ˜>External AR programmed for 1pole only ˜CG˜ ˜ ˜IOT˜
˜ 383˜>RAR Release ˜>Release overreach zones RAR ˜CG˜CG˜ ˜IOT˜
˜ 384˜>DAR Release ˜>Release overreach zones DAR ˜CG˜CG˜ ˜IOT˜
˜ 501˜Device FltDet˜General fault detection of device ˜ ˜ ˜ ˜ OT˜
˜ 502˜Dev. Drop-off˜General drop-off of device ˜ ˜C ˜ ˜ ˜
˜ 503˜Dev.FltDet L1˜General device fault detection: Ph. L1 ˜ ˜ ˜ ˜ OT˜
˜ 504˜Dev.FltDet L2˜General device fault detection: Ph. L2 ˜ ˜ ˜ ˜ OT˜
˜ 505˜Dev.FltDet L3˜General device fault detection: Ph. L3 ˜ ˜ ˜ ˜ OT˜
˜ 506˜Dev.FltDet N ˜General device fault detection: Ph. N ˜ ˜ ˜ ˜ OT˜
˜ 511˜Device Trip ˜General trip of device ˜ ˜ G˜ ˜ OT˜
˜ 512˜Dev.Trip 1pL1˜General 1pole trip of device: Phase L1 ˜ ˜ ˜ ˜ OT˜
˜ 513˜Dev.Trip 1pL2˜General 1pole trip of device: Phase L2 ˜ ˜ ˜ ˜ OT˜
˜ 514˜Dev.Trip 1pL3˜General 1pole trip of device: Phase L3 ˜ ˜ ˜ ˜ OT˜
˜ 515˜Dev.Trip 3p ˜General 3pole trip of device ˜ ˜ ˜ ˜ OT˜
˜ 516˜Dev.Trip forw˜General trip for fault in forward dir. ˜ ˜ ˜ ˜ OT˜
˜ 517˜Dev.Trip rev.˜General trip for fault in reverse dir. ˜ ˜C ˜ ˜ OT˜
˜ 521˜IL1/In= ˜Interrupted current: Phase L1(I/In) ˜ ˜C ˜ ˜ ˜
˜ 522˜IL2/In= ˜Interrupted current: Phase L2(I/In) ˜ ˜C ˜ ˜ ˜
˜ 523˜IL3/In= ˜Interrupted current: Phase L3(I/In) ˜ ˜C ˜ ˜ ˜
˜ 545˜T-Drop ˜Time from fault detection to drop-off ˜ ˜ ˜ ˜ ˜
˜ 546˜T-Trip ˜Time from fault detection to trip ˜ ˜ ˜ ˜ ˜
˜ 561˜Manual Close ˜Circuit breaker manually closed (pulse)˜C ˜ ˜ ˜ OT˜
˜ 562˜Man.Close Cmd˜CB close command for manual closing ˜ ˜ ˜ ˜ OT˜
˜ 563˜CB Alarm Supp˜CB alarm suppressed ˜ ˜ ˜ ˜ OT˜
˜ 601˜IL1[%] = ˜Current in phase IL1 [%] = ˜ M˜ ˜ ˜ ˜
˜ 602˜IL2[%] = ˜Current in phase IL2 [%] = ˜ M˜ ˜ ˜ ˜
˜ 603˜IL3[%] = ˜Current in phase IL3 [%] = ˜ M˜ ˜ ˜ ˜
˜ 621˜UL1E[%]= ˜UL1E [%]= ˜ M˜ ˜ ˜ ˜
˜ 622˜UL2E[%]= ˜UL2E [%]= ˜ M˜ ˜ ˜ ˜
˜ 623˜UL3E[%]= ˜UL3E [%]= ˜ M˜ ˜ ˜ ˜
˜ 624˜UL12[%]= ˜UL12 [%] = ˜ M˜ ˜ ˜ ˜
˜ 625˜UL23[%]= ˜UL23 [%] = ˜ M˜ ˜ ˜ ˜
¥©©©©¦©©©©©©©©©©©©©¦©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©©¦©©¦©©¦©¦©©©¾