Siemens SIPART PS2 PA 6DR55 Series, Руководство по эксплуатации

Страница: 61 / 292

Installing the optional modules
5.2 Iy module
SIPART PS2 with PROFIBUS communication
Operating Instructions, 09/2007, A5E00127926-07
61
5.2 Iy module
Function
● The optional I
y
module indicates the current actuator position as a dual line signal with
I
y
= 4 to 20 mA. The I
y
module is potentially separated from the standard controller.
Thanks to the dynamic control, this module can report the arising operational faults
automatically.
● The current actuator position is indicated only after a successful initialization.
Figure 5-3 I
y
module
Device features
The I
y
module is:
● Single channel
● Potentially separated from the standard controller.
Installing the I
y
module
Proceed as follows to install the optional I
y
module:
1. Slide the I
y
module up to the end stop in the lower stack of the module rack.
2. Connect the module to the motherboard. For this purpose, use the 6-pole flat ribbon
cable provided.