manualshive.com logo in svg

Siemens SINUMERIK ONE PPU 1740 Series, Руководство по эксплуатации оборудования, Страница: 95 / 106

Поделиться
Скачать
Siemens SINUMERIK ONE PPU 1740 Series Скачать руководство пользователя страница 95

9.1

Relevant directives and standards

Certificates

You can obtain an up-to-date list of currently certified components on request from your local 

Siemens office. If you have any questions relating to certifications that have not yet been 

completed, please ask your Siemens contact person. The certificates can be downloaded from 

the Internet:  Certificates (

https://support.industry.siemens.com/cs/ww/en/ps/14590/cert

) 

EC Declaration of Conformity

You can find the EC Declaration of Conformity for the relevant directives as well 

as the relevant certificates, prototype test certificates, manufacturers declara‐

tions and test certificates for functions relating to functional safety ("Safety In‐

tegrated") on the Internet at the following Address_SI (

https://

support.industry.siemens.com/cs/de/en/view/109747434

). 

Relevant directives and standards

The following directives and standards are relevant for SINUMERIK ONE devices:
● European Machinery Directive 

SINUMERIK ONE devices fulfil the requirements stipulated in the European Machinery 

Directive 2006/42/EU, insofar as they are covered by the application area of this directive. 

However, the use of the SINUMERIK ONE devices in a typical machine application has 

been fully assessed for compliance with the main regulations in this directive concerning 

health and safety.

● Directive 2011/65/EU

SINUMERIK ONE devices comply with the requirements of Directive 2011/65/EU on the 

restriction of the use of certain hazardous substances in electrical and electronic devices 

(RoHS II).

● European EMC Directive

SINUMERIK ONE devices comply with the EMC Directive 2014/30/EU.

● EMC requirements for South Korea

SINUMERIK ONE devices with the KC marking on the type plate satisfy the EMC 

requirements for South Korea.

● Eurasian conformity

SINUMERIK ONE comply with the requirements of the Russia/Belarus/Kazakhstan 

customs union (EAC). 

Technical data

9.1 Relevant directives and standards

PPU 1740

Equipment Manual, 01/2019, A5E47615272B AA 

95

Содержание SINUMERIK ONE PPU 1740 Series











































































































Отзывы:

Нет отзывов