Siemens SINUMERIK MCU1720, Руководство по эксплуатации оборудования

Страница: 74 / 102

Cable specification
For PROFINET, you always require a data transmission rate of 100 Mbit/s (Fast Ethernet) in full
duplex mode. For data transfer purposes, you can use twisted-pair copper cables (4-wire,
100Base-T).
Table 8-8 Cable specification for X150 ports 1, 2
Characteristic Version
Connector type RJ45 socket
Cable type Industrial Ethernet cable (as of CAT5)
Max. cable length 100 m
8.11 Digital inputs/outputs
8.11.1 DIO application
Connecting sensors and actuators
Digital inputs and outputs can be used to connect various sensors and actuators to the 2x7-pole
connectors X142/X152 on the front panel.
The following types of digital I/O are used:
● Digital inputs (isolated)
● Digital outputs (electrically isolated)
● Bidirectional digital inputs/outputs (only for drive terminals)
The assignment of I/Os to functions can be parameterized freely by the user.
The enable signals for the drive units and/or motors (Line Module, Motor Module) connected to
the MCU can be switched using the digital inputs.
Note
Terminal assignments
When commissioning the drive wizard, the digital inputs/outputs are correspondingly
preassigned functions.
For more information about terminal assignment, see:
● Commissioning Manual "IBN CNC: NCK, PLC, drive", Chapter "Communication interfaces
and terminal assignment"
● "Guidelines for machine configuration" System Manual, Chapter "Interfaces and their
terminal assignment"
Connecting
8.11 Digital inputs/outputs
MCU 1720
74
Equipment Manual, 09/2019, A5E47437728B AB