Note
Remove the transport protective foil and packaging material before installing the components.
5.2.2
Operating conditions
The components of the SINUMERIK MC system are intended for a weatherproof, fixed
location. The documented environmental conditions apply to the climate in the immediate
vicinity of the units and to the entry of the cooling air. They exceed the requirements according
to EN 60204-1, EN 61800-2, EN 61131-2 and IEC 62477-1.
Table 5-2
Ambient conditions for operation
Ambient conditions
Application areas
Remarks
Climatic environmental conditions
Climate class
Better than class 3K3
According to EN 60721‑3-3
Limit temperatures at
100% load
Horizontal mounting po‐
sition:
0 °C ... 50 °C
1)
Vertical mounting posi‐
tion/portrait mounting:
0 °C ... 45 °C
1)
Above an altitude of 2 000 m, the max. ambient
temperature decreases by 10 °C for every 1 000 m
increase in altitude - derating.
Gradient
Max. 10 °C/h
Relative humidity (with‐
out condensation)
5 to 80%
Condensation, icing,
drip, spray and splash
water
Not permitted
Max. installation alti‐
tude
Up to 4 000 m (13 123 ft)
above sea level
Air pressure
689 ... 1080 hPa
Biological, chemical and mechanical influences, pollutants
Biological environmental conditions
Class 3B1 according to EN 60 721‑3‑3:
Mold, mold growth, slime, rodents, termite and oth‐
er animal vermin are not permissible.
Mechanically active environmental conditions
Class 3S1 according to EN 60721‑3‑3:
Conductive dust not permitted.
Classification of the mechanical
environment
3M3 for components on the machine
3M1 / 3M2 for components in the control cabinet
Vibratory load
Frequency range: 5 – 500 Hz
Deflection at 5 – 9 Hz: 3.5 mm
Acceleration at 9 – 500 Hz: 9.8 m/s
2
or 1 g
Shock load with shock-sensitive components
Acceleration: 150 m/s
2
Shock duration: 11 ms
Load: 3 x in each direction
Application planning
5.2 Climatic and mechanical environmental conditions
MCU 1720
38
Equipment Manual, 09/2019, A5E47437728B AB
Содержание SINUMERIK MCU1720
