manualshive.com logo in svg

Siemens SINUMERIK 840D sl, Руководство по эксплуатации, Страница: 717 / 942

Поделиться
Скачать
Siemens SINUMERIK 840D sl Скачать руководство пользователя страница 717

Tool management

13

13.1

Lists for the tool management

All tools and also all magazine locations that have been created or configured in the NC are 

displayed in the lists in the Tool area.   
All lists display the same tools in the same order. When switching between the lists, the cursor 

remains on the same tool in the same screen segment.
The lists have different parameters and softkey assignments. Switching between lists is a 

specific change from one topic to the next.
● Tool list

All parameters and functions required to create and set up tools are displayed.

● Tool wear

All parameters and functions that are required during operation, e.g. wear and monitoring 

functions, are listed here.

● Magazine

You will find the magazine and magazine location-related parameters and functions for the 

tools / magazine locations here.

● Tool data OEM

This list can be freely defined by the OEM.

Sorting the lists
You can change the sorting within the lists according to:
● The magazine
● The name (tool identifier, alphabetic)
● The tool type
● The T number (tool identifier, numerical)
● The D number

Filtering the lists
You can filter the lists according to the following criteria:
● Only display the first cutting edge
● Only tools that are ready to use
● Only tools that have reached the pre-alarm limit
● Only locked tools
● Only tools with active code

Turning

Operating Manual, 06/2019, A5E44903486B AB

717

Содержание SINUMERIK 840D sl















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов