Siemens SINUMERIK 840D sl, Руководство по эксплуатации функций

Страница: 844 / 2184

Detailed description
2.4 Frames
Basic logic functions: Axes, coordinate systems, frames (K2)
60
Function Manual, 11/2006, 6FC5397-0BP10-2BA0
2.4.2.6 Chain operator
Frame components or complete frames can be combined into a complete frame using the
chain operator ( : ).
2.4.2.7 Programmable axis identifiers
Geo, channel and machine axis identifiers can be used in the frame commands. The
programmed axis must be known to the channel-specific frames in the channel.
SPI
When programming frame instructions, the
SPI(<spindle number>)
axis function can be
used in place of an axis identifier.
SPI(<spindle number>)
forms the reference of the spindle to the channel axis.
→ refer to MD35000 $MA_SPIND_ASSIGN_TO_MACHAX[ ] (assignment of spindle to
machine axis)
The following frame instructions can be programmed with
SPI(spino)
:
CTRANS()
CFINE()
CMIRROR()
CSCALE()
A spindle can only be assigned to one rotary axis at a time. The
CROT(..)
function can
therefore not be programmed with
SPI()
, as only geometry axes are permitted for
CROT()
.
The channel axis identifier or machine axis identifier of the axis belonging to the spindle is
always output when decompiling frames, even when axis identifiers have been programmed
in the part program with
SPI(..)
.
If the spindle is assigned e.g., to the Channel Axis A then the programming:
N10 $P_UIFR[1] =
CTRANS(SPI(1),33.33,X,1):CSCALE(SPI(1),33.33):CMIRROR(SPI(1))
during recompilation:
$P_UIFR[1]=CTRANS(X,1,A,33.33):CSCALE(A,33.33):CMIRROR(A)
If a spindle and an assigned axis are programmed in a frame instruction, then Alarm 16420
"Axis % multiply programmed" is output.
Example:
$P_UIFR[1] = CTRANS(SPI(1),33.33,X,1,A,44)
(The spindle is assigned to Axis A.)
Programming examples
$P_PFRAME[SPI(1),TR]=22.22
$P_PFRAME=CTRANS(X, axis value,Y,axis value,SPI(1),axis value)
$P_PFRAME=CSCALE(X,Scale,Y,scale,SPI(2),scale)
$P_PFRAME=CMIRROR(S1,Y,Z)
$P_UBFR=CTRANS(A,10):CFINE(SPI(1),0.1)