manualshive.com logo in svg

Siemens SINUMERIK 840D sl TCU 30.3, Руководство пользователя

Поделиться
Скачать
Siemens SINUMERIK 840D sl TCU 30.3 Скачать руководство пользователя страница 35

The following rules apply for assignment of IP addresses in the system network:
● For all NCUs and PCUs, the commissioning engineer assigns fixed IP addresses in the 

associated address bands, as well as appropriate computer names (host names). All other 

(operator) components are automatically assigned an IP address from the DHCP server. 

Its name is generated automatically (for MCP, MPP, HT 8), or is entered at commissioning 

(TCU).

● If there are multiple NCU and/or PCU in the system network the system automatically 

(depending on the start-up sequence) specifies the DHCP server and automatically ensures 

synchronization of all necessary data so that the next time the system boots any other NCU 

or PCU could take on the role of DHCP server. However it is better to specify a DHCP 

master. This is an NCU or PCU in the system network that is available at each system boot 

and which regularly takes over the task of the DHCP server and DNS server.

Synchronization of data takes place in any event so that any other NCU or PCU can take 

over this task. All non-master NCU / PCU wait in the system boot an adjustable time for 

availability of the master.

Note
In a system network, on a boot server respectively - i.e. the NCU or PCU which 

accommodates the active DHCP server - a maximum of 30 operator stations may be 

operated simultaneously with a TCU.
A maximum of 10 operator stations with a TCU may connect up simultaneously with the 

same HMI application when powering up.

Connection to a company network   

Each NCU can be connected via X130, and each PCU can be connected via "Ethernet 1" to 

the company network. The company network is used to exchange operating software with 

servers or to execute part-programs directly from servers in the company network. Company 

network and system network should always be logically and also physically separated. 

Service interface X127

The service interface X127 of the NCU is used for direct connection of a PG/PC for service 

purposes. Here, access with STEP 7 to the PLC, and with NCU 7x0.3 PN also to PROFINET 

is possible. 
With direct connection (peer-to-peer) of a PG/PC to X127 it is absolutely necessary that the 

PG is operated as a DHCP client. 

Networking

5.1 System settings

TCU 30.3

Manual, 09/2017, A5E40874197

35

Содержание SINUMERIK 840D sl TCU 30.3

























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды