Siemens SINUMERIK 828D Turning Скачать руководство пользователя страница 788

Страница: 788 / 940

14.16

Backing up data

14.16.1

Generating an archive in the Program Manager

You have the option of archiving individual files from the NC memory and the local drive.

Archive formats
You have the option of saving your archive in the binary and punched tape format.

Save target
The archive folder of the system data in the "Startup" operating area as well as USB and

network drives are available as save target.

Procedure

Select the "Program Manager" operating area.

Select the storage location for the file/files to be archived.

In the directories, select the required file from which you want to create

an archive.

- OR -

If you want to back up several files or directories, press the "Select" soft‐

key.
Make the selection using the cursor keys or mouse.

Press the ">>" and "Archive" softkeys.

Press the "Generate archive" softkey.
The "Generate Archive: Select archiving" window opens.

Position the cursor to the required storage location, press the "Search"

softkey, enter the required search term in the search dialog and press

the "OK" softkey if you wish to search for a specific directory or subdirec‐

tory.
Note: The place holders "*" (for any character string) and "?" (for any

character) make it easier for you to perform a search.

- OR -

Select the required storage location, press the "New directory" softkey,

enter the required name in the "New directory" window and press the

"OK" softkey to create a directory.

Managing programs
14.16 Backing up data

Milling

788

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

Содержание SINUMERIK 828D Turning













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SINUMERIK 828D Turning

Отзывы:

Бренды по названию

Популярные бренды

Siemens SINUMERIK 828D Turning, Руководство по эксплуатации

Результаты поиска

Содержание SINUMERIK 828D Turning

Отзывы:

Бренды по названию

Популярные бренды