Siemens SINUMERIK 828D Turning Скачать руководство пользователя страница 231

Страница: 231 / 940

6.11.3.3

Assigning the machining plane

You can select the machining plane in which the contour created with the DXF reader should

be located.

Procedure

The DXF file is opened in the editor.

Press the "Select plane" softkey.
The "Select Plane" window opens.

Select the desired plane and press the "OK" softkey.

6.11.3.4

Setting the tolerance

To allow even inaccurately created drawings to be used, i.e. to compensate for gaps in the

geometry, you can enter a snap radius in millimeters. This relates elements.

Note
Large snap radius
The larger that the snap radius is set, the larger the number of available following elements.

Procedure

The DXF file is opened in the editor.

Press the "Details" and "Snap radius" softkeys.
The "Input" window appears.

Enter the desired value and press the "OK" softkey.

6.11.3.5

Selecting the machining range / deleting the range and element

You can select ranges in the DXF file and therefore reduce the elements. After accepting the

2nd position, only the contents of the selected rectangle are displayed. Contours are cut to the

rectangle.

Requirement

The DXF file is open in the editor.

Machining the workpiece

6.11 Working with DXF files

Milling

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0

231

Содержание SINUMERIK 828D Turning













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание SINUMERIK 828D Turning

Отзывы:

Siemens SINUMERIK 828D Turning, Руководство по эксплуатации, Страница: 231 / 940

Результаты поиска

Содержание SINUMERIK 828D Turning

Отзывы: