Siemens SINEMA Remote Connect страница 72 Скачать руководство пользователя

Страница: 72 / 122

Configuring with Web Based Management

4.7 Remote connections

SINEMA Remote Connect - Server

Operating Instructions, 11/2017, C79000-G8976-C383-04

4.7.1.3

Creating several new devices

Requirement

●

The csv file exists and is filled correctly, see Structure of the csv file (Page 116).

●

The activated license is adequate, see Managing licenses (Page 57).

Importing a csv file

Click the "Import" button on the page with the device list.

Click the "Browse" button and select the csv file.

Click "Import".

Result
Before it is imported, the csv file is checked to make sure it is correct. After importing the file,

the devices are listed on the "Device selection" tab. The devices have not yet, however,

been created on the SINEMA Server.

Creating a device

Check the status of the devices. The devices can have the following status.

Symbol

Status

Description

Valid

All settings are OK. The device can be created without prob-

lems.

Warning

A device with this name already exists.
The settings of this device will be overwritten by the settings

from the csv file.

Invalid

The device cannot be imported. Either there is a conflict in

the network settings or the participant group does not exist.
If you hover over the symbol with the mouse pointer some-

what longer, the name of the device with which the conflict

exists will be displayed.

Select the required devices.

Enter a password and confirm it. See also the guidelines in the section "Permitted

characters (Page 21)".

Click "Finish".

Result
The devices will be created on the SINEMA RC Server. Depending on how many devices

you have selected, creating them may take some time.

Содержание SINEMA Remote Connect



























































































































Результаты поиска

Содержание SINEMA Remote Connect

Отзывы:

Похожие инструкции для SINEMA Remote Connect

Бренды по названию

Популярные бренды

Siemens SINEMA Remote Connect, Руководство по эксплуатации

Результаты поиска

Содержание SINEMA Remote Connect

Отзывы:

Похожие инструкции для SINEMA Remote Connect

Бренды по названию

Популярные бренды