Station control system
System Manual, 07/2009, C79000-G8976-C178-07
89
Network structures and topologies
2
The following overview shows you the network structures that can be implemented with
SINAUT ST7 in a WAN and on Industrial Ethernet. For each network configuration, you will
also see the protocols and modes with which SINAUT can handle communication over the
network.
2.1
Overview of the possible network types
With SINAUT ST7, complete hierarchical control networks consisting of stations, node
stations and master station can be set up over a WAN (Wide Area Network).
The following WAN types can be used to exchange information between the devices:
IP-based WAN
SINAUT communication is possible between station and control center and between stations
over IP-based WANs:
●
Over public networks and Internet with DSL or GPRS
●
Over wireless by using special wireless devices optimized for Ethernet, for example,
SCALANCE W
●
Over fiber-optic cable
–
For example by using SCALANCE X switches with optical ports; this allows distances
of up to 120 km to be covered,
or also
–
in conjunction with transmission systems such as PCM30 or OTN
Classic WAN
The following classic WANs can be used for data transmission:
●
Dedicated lines, private or leased copper or fiber-optic cable
●
Private wireless networks (optionally with time slots)
●
Analog telephone network
●
Digital ISDN network
●
Mobile wireless network GSM
