Siemens SINAMICS SL150 6SL39616RC100AA02, Инструкция по эксплуатации и установке

Страница: 26 / 100

3.1.2 Description of the components
3.1.2.1 SINAMICS Control Unit
The CU320 Control Unit is the central control module of the drive's open-loop and closed-loop
control system. The connections are wired internally to the customer terminal block.
Further information is available in the following documents:
● You will find information on the wiring in the circuit manual in the "Technical data and
drawings" appendix.
● Information is provided on the interfaces and LEDs in the "Supplementary component
descriptions" document on the CD.
See also
Technical specifications and drawings (Page 91)
3.1.2.2 SIMOTION Control Unit
The D4x5 Control Unit is the central control module of the drive's open-loop and closed-loop
control system. The connections are wired internally to the customer terminal block.
Reference to information in the appendix (Simotion CUs)
Further information is available in the following documents:
● You will find information on the wiring in the circuit manual in the "Technical specifications
and drawings" appendix.
● You can find information on the interfaces and LEDs in the "D4x5-2" document.
3.1.2.3 DRIVE-CLiQ interface
Table 3-1 DRIVE-CLiQ interface
Pin Signal name Technical data
1 TXP Transmit data +
2 TXN Transmit data -
3 RXP Receive data +
4 Reserved, do not use
5 Reserved, do not use
6 RXN Receive data -
7 Reserved, do not use
8 Reserved, do not use
Description
3.1 Closed-loop control
SINAMICS SL150 6SL39616RC100AA02
26
Operating Instructions Rev.201910281458 EXAMPLE