Siemens SINAMICS S150 NEMA, Руководство по эксплуатации

Страница: 581 / 862

Functions, monitoring and protective functions
9.3 Drive functions
Enclosed Drives
Operating Instructions, 12/2018, A5E36652151A
579
Parameters
•
p3880
BI: ESM activation signal source
•
p3881
ESM setpoint source
•
p3882
ESM alternative setpoint source
•
p3883
BI: ESM direction of rotation signal source
•
p3886
CI: ESM setpoint TB30/TM31 analog input
•
r3887[0...1]
ESM activations/faults, quantity
•
p3888
ESM activations/faults, reset quantity
•
r3889.0...10 CO/BO: ESM status word
9.3.24 Web server
9.3.24.1 Description
General information
The integrated web server provides information about the drive unit via its web pages. This is
accessed via an Internet browser. The information on the Web pages is shown in English.
For information about message texts, drive object states and parameter names, there is a
language selection which allows a switchover of the display to the languages that are stored
on the memory card.
The most important functions of the Web server are described below. However, the "Files"
and "User's Area" display areas of the Web server are described in detail in a separate
document (see "User-defined Web pages"). For this reason, these display areas are not
described in this description.
Note
Total memory size of user files
The sum of the data stored via the web server must not exceed the total memory size of
100 MB. The total memory size of the stored data influences the backup times. The larger
the data quantity, the longer the backup takes.
Activation/configuration
The web server is already active in the factory settings.
The web server is configured via parameter p8986 (web server configuration).