Siemens SINAMICS S150 NEMA, Руководство по эксплуатации

Страница: 377 / 862

Operation
6.9 Communication via PROFINET IO
Enclosed Drives
Operating Instructions, 12/2018, A5E36652151A
375
Control Unit with CBE20
The CBE20 Communication Board can be optionally inserted into Control Unit CU320-2 PN
or CU320-2 DP:
● The CBE20 Communication Board is a PROFINET switch with 4 additional PROFINET
ports.
Note
PROFINET routing
Routing is neither possible between the onboard interfaces X127 and X150 of the CU320-2
PN, nor between the onboard interfaces of the CU320-2 PN and an inserted CBE20.
6.9.3 Communication with CBE20
6.9.3.1 Selecting the CBE20 firmware
The CBE20 is a Communication Board that can be flexibly used and which can be operated
with different communication profiles. Only one firmware of a communication profile can be
loaded at any one time. The available firmware files are saved with the communication
profiles in UFW files on the Control Unit memory card.
The required file is selected using parameter p8835. A POWER ON must be carried out after
selecting the required UFW file. During the subsequent system boot, the corresponding UFW
file is loaded. The new selection then becomes active.
Table 6- 30 Functionality and selection in the pointer file
Functionality (p8835) Pointer file content
PROFINET device 1
PN Gate 2
SINAMICS Link 3
EtherNet/IP 4
Customer-specific
1)
99
1)
Path for the UFW file and folders on the memory card: /OEM/SINAMICS/CODE/CB/CBE20.UFW
Identification of the firmware version
Using parameter r8858, the loaded firmware version of the PROFINET interface can be
identified uniquely.