Siemens SINAMICS S150 NEMA, Руководство по эксплуатации, Страница: 278 / 862

Operation
6.3 Basic information about the drive system
Enclosed Drives
276
Operating Instructions, 12/2018, A5E36652151A
Note
Using STARTER
The STARTER parameterization and commissioning tool is recommended when using BICO
technology.
Binectors, BI: Binector input, BO: Binector output
A binector is a digital (binary) signal without a unit which can assume the value 0 or 1.
Binectors are subdivided into binector inputs (signal sink) and binector outputs (signal
source).
Table 6- 3 Binectors
Abbreviation and
symbol
Name Description
Binector input
Binector Input
(signal sink) Can be interconnected to a binector output as
source.
The number of the binector output must be
entered as a parameter value.
Binector output
Binector output
(signal source) Can be used as a source for a binector input.
Connectors, CI: Connector input, CO: Connector output
A connector is a digital signal e.g. in 32-bit format. It can be used to emulate words (16 bits),
double words (32 bits) or analog signals. Connectors are subdivided into connector inputs
(signal sink) and connector outputs (signal source).
The options for interconnecting connectors are restricted to ensure that performance is not
adversely affected.
Table 6- 4 Connectors
Abbreviation and
symbol
Name Description
Connector input
Connector input
(signal sink) Can be interconnected to a connector output as
source.
The number of the connector output must be
entered as a parameter value.
Connector output
Connector output
(signal source) Can be used as a source for a connector input.