Siemens SINAMICS S150 NEMA, Руководство по эксплуатации

Страница: 181 / 862

Electrical installation
4.9 Additional connections
Enclosed Drives
Operating Instructions, 12/2018, A5E36652151A
179
4.9.24 TM31 wired to customer terminal block (option G65)
Description
The standard version contains a TM31 interface module (–A60) as a customer terminal
block.
With option G65, the connections of the TM31 (-A60) are routed to an intermediate terminal
block (-X65), which can be used for customer connections with a larger conductor cross
section.
The pin assignment of the interfaces is described in "Electrical installation", "Signal
interfaces".
4.9.25 Additional TM31 (option G61) wired to customer terminal block (option G66)
Description
An additional TM31 interface module is installed in the control cabinet with option G61.
With option G66, the connections of the TM31 (-A61) are routed to an interface module
(-X66) to which the customer connections with a larger conductor cross section can be
made.
The pin assignment of the interfaces is described in "Electrical installation", "Signal
interfaces".
4.9.26 Safety license for 1 axis (option K01)
Description
The Safety Integrated Basic functions do not require a license. A license is, however,
required for each axis with safety functions in the case of Safety Integrated Extended
functions. It is irrelevant which safety functions are used and how many.
With option K01, the Safety license for 1 axis is included on the CompactFlash Card and
activated.
Licenses
The required license can optionally be ordered with the CompactFlash card.
Subsequent licensing is realized in the Internet using the "WEB License Manager" by
generating a license key:
http://www.siemens.com/automation/license