Siemens SINAMICS S150 NEMA, Руководство по эксплуатации

Страница: 113 / 862

Electrical installation
4.8 Signal connections
Enclosed Drives
Operating Instructions, 12/2018, A5E36652151A
111
S5: Selector for voltage/current AI0, AI1
Note
Position of the selector
The selector is located on the customer terminal block TM31 (-A60), a selector setting also
has to be made on TM31 for devices with option G65.
Table 4- 23 Selector for voltage/current S5
Switch Function
S5.0 Selects voltage (V) / current (I) Al0
S5.1 Selects voltage (V) / current (I) Al1
Note
Factory state
The factory state for both switches is current measurement (switch set to "I").
X522: 2 analog outputs, temperature sensor connection
Table 4- 24 Terminal block X522
Connector Terminal Designation 1) Technical specifications
1 AO 0V+ You can set the following output signals using
parameters:
Voltage: -10 … +10 V (max. 3 mA)
Current 1: 4 … 20 mA (max. load resistance
≤ 500 Ω )
Current 2: -20 … +20 mA (max. load resistance
≤ 500 Ω )
Current 3: 0 … 20 mA (max. load resistance
≤ 500 Ω )
Resolution: 11 bits + sign
Sustained short-circuit-proof
2 AO 0-
3 AO 0C+
4 AO 1V+
5 AO 1-
6 AO 1C+
7 +Temp
2)
Temperature sensor KTY84-1C130/PT1000/PTC
Measuring current via temperature sensor
connection: 2 mA
8 -Temp
2)
Max. connectable cross-section:
- Standard version: #16 AWG (1.5 mm²)
- Version with option G65: #14 AWG (2.5 mm²)
1)
AO xV: analog output voltage; AO xC: analog output current
2)
Accuracy of the temperature measurement:
- KTY: ±7 °C (including evaluation)
- PT1000: ±5 °C (PT1000 tolerance class B according to EN 60751 including evaluation)
- PTC: ±5 °C (including evaluation)