Siemens SINAMICS S 1PH7, Руководство по настройке

Страница: 198 / 244

Motor components (options)
5.4 Gearbox
1PH7 induction motors (Machine tools)
198
Configuration Manual, (APH7W), 04/2009, 6SN1197-0AD72-0BP0
5.4.4 Technical data
Table 5- 6 Technical data for gearbox
ZF
designation
Motor
shaft
height
Order No. n
max
[rpm] Rated torque [Nm]
(S1 duty)
Maximum torque [Nm]
(S6 duty, 10 min. cycle
duration, max. 60 % on
period)
Weight
[kg]
Output
housing
a10
[mm]
Drive Output Drive Output
i=1 i=4 i=1 i=4
2K120 100 2LG4312-... 8000
1)
9000
2)
120 120 480 140 140 560 30 100
2K250 132 2LG4315-... 6300
8000
2)
250 250 1000 400 400 1600 62 116
2K300 160 2LG4320-... 6300
8000
2)
300 300 1200 400 400 1600 70 140
2K800
3)
184 2LG4250-... 5000 800 800 3200 900 900 3600 110 200
2K801
3)
186 2LG4260-... 5000 800 800 3200 900 900 3600 110 200
2K802 225 2LG4570-... 5000 800 800 3200 900 900 3600 110 200
1)
Higher maximum speed from 8000 ... 9000 rpm for more than 20% on-period is only possible with injection lubrication.
2)
Permissible with gearbox oil cooling for gearbox stage i = 1.
3)
Can be supplied with holding brake (option).
NOTICE
When designing the complete drive unit (motor with gear) the gearbox data is decisive.
For example, for the 1PH7167-2NB motor, the torque should be reduced to 300 Nm. For
motors, shaft heights 100 and 132, the maximum motor speed should be limited to the
permissible gearbox speed 2K120/2K250.
For other binding technical data and engineering information/instructions (e.g. lubrication,
temperature rise, permissible radial forces and examples), please refer to Catalog from ZF
Friedrichshafen AG.