Siemens SINAMICS G180, Инструкция по установке и эксплуатации, Страница: 23 / 218

Safety information
2.7 Standards and guidelines for proper use of inverters
Installation and Operating Instructions SINAMICS G180
Operating Instructions, 02/2019, 4BS0751-007
21
First aid measures
The following table lists the first aid measures:
Table 2- 1 Antifreeze: First aid measures
Event Measure
Wetted clothing Remove clothing immediately.
Skin contact Wash off immediately with plenty of water.
Eye contact Rinse thoroughly and immediately with plenty of water and seek medical
advice.
If swallowed If the affected person is completely conscious, immediately induce vomit-
ing. In any case, consult a doctor.
In addition, observe the provisions of the EC safety data sheet in accordance with
91/155/EEC, as well as the generally applicable first aid rules.
2.7 Standards and guidelines for proper use of inverters
Inverters are components which are intended for installation in electrical systems or machines.
Commissioning of the inverters is prohibited until one of the following two conditions is
verifiably fulfilled.
● The machine complies with the requirements of the following directives:
–
Machinery directive 2006/42/EG
– EMC directive 2014/30/EG
● The electrical installation complies with the requirements of the following directives:
–
Low-voltage directive 2014/35/EG
– EMC directive
The inverters comply with the requirements of the low-voltage directive 2014/35/EG and the
EMC directive 2014/30/EG.
To ensure that this equipment functions perfectly and safely, observe the following:
● Transportation in accordance with proper procedures
● Proper storage
● Proper installation and assembly
● Careful operation
● Careful maintenance
The unit must only be used for the applications specified in the catalog and only in
conjunction with devices and components recommended and approved by Siemens.