Siemens SINAMICS G120P, Руководство по эксплуатации

Страница: 197 / 496

Operation
6.5 PROFIdrive profile for PROFIBUS and PROFINET
Inverter cabinet units
Operating Instructions, 12/2014, A5E32923362A
197
Offset and page index of the parameter numbers
Parameter numbers < 2000 PNU = parameter number.
Write the parameter number into the PNU (PKE bit 10 ... 0).
Parameter numbers ≥ 2000 PNU = parameter number - offset.
Write the parameter number minus the offset into the PNU
(PKE bit 10 … 0).
Write the offset in the page index (IND bit 7 … 0).
Parameter number Offset Page index
Hex Bit 7 Bit 6 Bit 5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0
0000 … 1999 0 0 hex 0 0 0 0 0 0 0 0
2000 … 3999 2000 80 hex 1 0 0 0 0 0 0 0
6000 … 7999 6000 90 hex 1 0 0 1 0 0 0 0
8000 … 9999 8000 20 hex 0 0 1 0 0 0 0 0
10000 … 11999 10000 A0 hex 1 0 1 0 0 0 0 0
20000 … 21999 20000 50 hex 0 1 0 1 0 0 0 0
30000 … 31999 30000 F0 hex 1 1 1 1 0 0 0 0
60000 … 61999 60000 74 hex 0 1 1 1 0 1 0 0
Indexed parameters
For indexed parameters, you must write the index as hex value into the subindex (IND
bit 15 … 8).
Parameter contents
Parameter contents can be parameter values or connector parameters. For interconnecting
connector parameters refer to BICO technology: Interconnecting signals (Page 174).
Enter the parameter value, right-justified, as follows in the 4th word of the parameter
channel:
•
8-bit values: 4th word, bit 0 … 7,
bits 8 … 15 of the 4th word and the 3rd word are zero.
•
16-bit values: 4th word, bits 0 … 15,
The 3rd word is zero.
•
32-bit values: 3rd and 4th word
Enter a connector parameter as follows:
•
Number of the connector parameter:
3rd word
•
Drive object of the connector parameter:
4th word, bits 10 … 15
•
The index or bit field number of the connector parameter:
4th word, bits 0 … 9