manualshive.com logo in svg

Siemens SINAMICS G120D CU240D-2 DP, Руководство пользователя

Siemens SINAMICS G120D CU240D-2 DP - Руководство пользователя доступно для бесплатного скачивания с manualshive.com. Описание продукта в 50 слов: Мотор-инвертор с компактным дизайном для простой установки и использования. Обеспечивает высокую производительность и надежность работы. Скачайте руководство для получения подробной информации по настройке и эксплуатации.

Поделиться
Скачать
background image

2 Parameters
2.2 List of parameters

SINAMICS G120D

388

 

List Manual (LH14), 01/2016, A5E33842313

Note:

The buffer parameters are cyclically updated in the background (refer to status signal in r2139).
The structure of the fault buffer and the assignment of the indices is shown in r0945.
For bits 20 ... 16:
Bits 20, 19, 18, 17, 16 = 0, 0, 0, 0, 0 --> PROFIdrive message class 0: not assigned
Bits 20, 19, 18, 17, 16 = 0, 0, 0, 0, 1 --> PROFIdrive message class 1: hardware fault/software error
Bits 20, 19, 18, 17, 16 = 0, 0, 0, 1, 0 --> PROFIdrive message class 2: line fault
Bits 20, 19, 18, 17, 16 = 0, 0, 0, 1, 1 --> PROFIdrive message class 3: supply voltage fault
Bits 20, 19, 18, 17, 16 = 0, 0, 1, 0, 0 --> PROFIdrive message class 4: DC link fault
Bits 20, 19, 18, 17, 16 = 0, 0, 1, 0, 1 --> PROFIdrive message class 5: power electronics faulted
Bits 20, 19, 18, 17, 16 = 0, 0, 1, 1, 0 --> PROFIdrive message class 6: overtemperature electronic components
Bits 20, 19, 18, 17, 16 = 0, 0, 1, 1, 1 --> PROFIdrive message class 7: ground fault/phase fault detected
Bits 20, 19, 18, 17, 16 = 0, 1, 0, 0, 0 --> PROFIdrive message class 8: motor overload
Bits 20, 19, 18, 17, 16 = 0, 1, 0, 0, 1 --> PROFIdrive message class 9: communication error to the higher-level control
Bits 20, 19, 18, 17, 16 = 0, 1, 0, 1, 0 --> PROFIdrive message class 10: safe monitoring channel has identified an 
error
Bits 20, 19, 18, 17, 16 = 0, 1, 0, 1, 1 --> PROFIdrive message class 11: incorrect position actual value/speed actual 
value or not available
Bits 20, 19, 18, 17, 16 = 0, 1, 1, 0, 0 --> PROFIdrive message class 12: internal (DRIVE-CLiQ) communication error
Bits 20, 19, 18, 17, 16 = 0, 1, 1, 0, 1 --> PROFIdrive message class 13: infeed unit faulted
Bits 20, 19, 18, 17, 16 = 0, 1, 1, 1, 0 --> PROFIdrive message class 14: braking controller/Braking Module faulted
Bits 20, 19, 18, 17, 16 = 0, 1, 1, 1, 1 --> PROFIdrive message class 15: line filter faulted
Bits 20, 19, 18, 17, 16 = 1, 0, 0, 0, 0 --> PROFIdrive message class 16: external measured value/signal state outside 
the permissible range
Bits 20, 19, 18, 17, 16 = 1, 0, 0, 0, 1 --> PROFIdrive message class 17: application/technology function faulted
Bits 20, 19, 18, 17, 16 = 1, 0, 0, 1, 0 --> PROFIdrive message class 18: error in the 
parameterization/configuration/commissioning sequence
Bits 20, 19, 18, 17, 16 = 1, 0, 0, 1, 1 --> PROFIdrive message class 19: general drive fault
Bits 20, 19, 18, 17, 16 = 0, 1, 1, 0, 0 --> PROFIdrive message class 20: auxiliary unit faulted

Description:

Displays the diagnostic attribute of the alarm which has occurred.

Dependency:

Refer to: r2110, r2122, r2123, r2124, r2125, r2134, r2145, r2146, r3121

Note:

The buffer parameters are cyclically updated in the background (refer to status signal in r2139).
The structure of the alarm buffer and the assignment of the indices is shown in r2122.
For bit 12, 11:
These status bits are used for the classification of internal alarm classes and are intended for diagnostic purposes 
only on certain automation systems with integrated SINAMICS functionality.
For bits 20 ... 16:
Bits 20, 19, 18, 17, 16 = 0, 0, 0, 0, 0 --> PROFIdrive message class 0: not assigned
Bits 20, 19, 18, 17, 16 = 0, 0, 0, 0, 1 --> PROFIdrive message class 1: hardware fault/software error

r3123[0...63]

Diagnostic attribute alarm / Diag_attr alarm

Access level: 

3

Calculated: 

-

Data type: 

Unsigned32

Can be changed:

 -

Scaling: 

-

Dyn. index: 

-

Unit group: 

-

Unit selection: 

-

Func. diagram: 

8065

Min Max 

Factory 

setting 

- - - 

Bit field:

Bit

Signal name

1 signal

0 signal

FP

00

Hardware replacement recommended

Yes

No

-

11

Alarm class bit 0

High

Low

-

12

Alarm class bit 1

High

Low

-

13

Maintenance required

Yes

No

-

14

Maintenance urgently required

Yes

No

-

15

Message has gone

Yes

No

-

16

PROFIdrive fault class bit 0

High

Low

-

17

PROFIdrive fault class bit 1

High

Low

-

18

PROFIdrive fault class bit 2

High

Low

-

19

PROFIdrive fault class bit 3

High

Low

-

20

PROFIdrive fault class bit 4

High

Low

-

Содержание SINAMICS G120D CU240D-2 DP





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SINAMICS G120D CU240D-2 DP

Tabor 8020 User Manual preview
8020
Бренд: Tabor Страницы: 111
Q Acoustics M20 Manual preview
M20
Бренд: Q Acoustics Страницы: 7
UNICOM FEP-5300TF-C Specifications preview
FEP-5300TF-C
Бренд: UNICOM Страницы: 1
Unipower SLI 15 User Manual preview
SLI 15
Бренд: Unipower Страницы: 19
3onedata IMC101B Series Quick Installation Manual preview
IMC101B Series
Бренд: 3onedata Страницы: 3
ICT SITE INVERTER 300 Instruction Manual preview
SITE INVERTER 300
Бренд: ICT Страницы: 8
Advantech B+B SmartWorx 485USB9F-2W Quick Start Manual preview
B+B SmartWorx 485USB9F-2W
Бренд: Advantech Страницы: 2
DeLOCK 86441 User Manual preview
86441
Бренд: DeLOCK Страницы: 2
Crystal Vision Indigo ADDEC-210 User Manual preview
Indigo ADDEC-210
Бренд: Crystal Vision Страницы: 37
Nuova Marea NM 251 Series User Manual preview
NM 251 Series
Бренд: Nuova Marea Страницы: 9
Tyba TY-B-CRE User Manual preview
TY-B-CRE
Бренд: Tyba Страницы: 14
T+A MP 2500 R User Manual preview
MP 2500 R
Бренд: T+A Страницы: 72
MAER IDROPULITRICI AVANT 120/11 Instructions For Installation And Use Manual preview
AVANT 120/11
Бренд: MAER IDROPULITRICI Страницы: 48
Systech Corporation SysLINK SL-800 Quick Start Manual preview
SysLINK SL-800
Бренд: Systech Corporation Страницы: 6
Baumer Hubner Berlin POG 86 Mounting And Operating Instructions preview
Hubner Berlin POG 86
Бренд: Baumer Страницы: 36
ADF Web HD67E57-A1 User Manual preview
HD67E57-A1
Бренд: ADF Web Страницы: 29
Stanley PC509 Instruction Manual preview
PC509
Бренд: Stanley Страницы: 7
Yuan HD2SDIS-EA User Manual preview
HD2SDIS-EA
Бренд: Yuan Страницы: 15

Бренды по названию

Популярные бренды

Загрузить еще бренды