manualshive.com logo in svg

Siemens SINAMICS G120D CU240D-2 DP, Руководство пользователя

Siemens SINAMICS G120D CU240D-2 DP - Руководство пользователя доступно для бесплатного скачивания с manualshive.com. Описание продукта в 50 слов: Мотор-инвертор с компактным дизайном для простой установки и использования. Обеспечивает высокую производительность и надежность работы. Скачайте руководство для получения подробной информации по настройке и эксплуатации.

Поделиться
Скачать
background image

2 Parameters
2.2 List of parameters

SINAMICS G120D

254

 

List Manual (LH14), 01/2016, A5E33842313

Description:

Sets the motor data identification and speed controller optimization.
The motor identification should first be performed with the motor stationary (p1900 = 1, 2; also refer to p1910). Based 
on this, additional motor and control parameters can be determined using the motor data identification with the motor 
rotating (p1900 = 1, 3; also refer to p1960; not for p1300 < 20).
p1900 = 0:
Function inhibited.
p1900 = 1:
Sets p1910 = 1 and p1960 = 0, 1 depending on p1300
When the drive enable signals are present, a motor data identification routine is carried out at standstill with the next 
switch-on command. Current flows through the motor which means that it can align itself by up to a quarter of a 
revolution.
With the following switch-on command, a rotating motor data identification routine is carried out - and in addition, a 
speed controller optimization by making measurements at different motor speeds.
p1900 = 2:
Sets p1910 = 1 and p1960 = 0
When the drive enable signals are present, a motor data identification routine is carried out at standstill with the next 
switch-on command. Current flows through the motor which means that it can align itself by up to a quarter of a 
revolution.
p1900 = 3:
Sets p1960 = 0, 1 depending on p1300
This setting should only be selected if the motor data identification was already carried out at standstill.
When the drive enable signals are present, with the next switch-on command, a rotating motor data identification 
routine is carried out - and in addition, speed controller optimization by taking measurements at different motor 
speeds.

Value:

0:

Inhibited

1:

Identifying motor data and optimizing the speed controller

2:

Identifying motor data (at standstill)

3:

Optimizing the speed controller (in rotating operation)

Dependency:

Refer to: p1300, p1910, p1960
Refer to: A07980, A07981, F07983, F07984, F07985, F07986, F07988, F07990, A07991

Notice:

p1900 = 3:
This setting should only be selected if the motor data identification was already carried out at standstill.
If there is a motor holding brake, it must be open (p1215 = 2).
To permanently accept the determined settings they must be saved in a non-volatile fashion (p0971).
During the rotating measurement it is not possible to save the parameter (p0971).
For p0014 = 1, the following applies:
After the value has been modified, no further parameter modifications can be made and the status is shown in r3996. 
Modifications can be made again when r3996 = 0.

Note:

The motor and control parameters of the vector control are only optimally set when both measurements are carried 
out (initially at standstill, and then with the motor rotating). The measurement with rotating motor is not performed for 
p1300 < 20 (U/f controls).
An appropriate alarm is output when the parameter is set.
The switch-on command must remain set during a measurement and after the measurement has been completed, 
the drive automatically resets it.
The duration of the measurements can lie between 0.3 s and several minutes. This time is, for example, influenced 
by the motor size and the mechanical conditions.
p1900 is automatically set to 0 after the motor data identification routine has been completed.
If a reluctance motor has been parameterized, a pole position identification is carried out during the stationary 
measurement. As a consequence, faults that occur can also be assigned to the pole position identification.

p1900

Motor data identification and rotating measurement / MotID and rot meas

CU250D-2_PN_F
CU250D-2_DP_F

Access level: 

2

Calculated: 

-

Data type: 

Integer16

Can be changed:

 C(1), T

Scaling: 

-

Dyn. index: 

-

Unit group: 

-

Unit selection: 

-

Func. diagram: 

-

Min Max 

Factory 

setting 

0 3 2 

Содержание SINAMICS G120D CU240D-2 DP





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SINAMICS G120D CU240D-2 DP

HANYOUNG NUX CV300 Instruction Manual preview
CV300
Бренд: HANYOUNG NUX Страницы: 2
YASKAWA CR700 Quick Start Manual preview
CR700
Бренд: YASKAWA Страницы: 128
Radyne ComStream SFC6400A Installation And Operation Manual preview
SFC6400A
Бренд: Radyne ComStream Страницы: 156
Sungrow SG3125HV-20 System Manual preview
SG3125HV-20
Бренд: Sungrow Страницы: 138
Transition Networks E-MCC-1600 Installation Manual preview
E-MCC-1600
Бренд: Transition Networks Страницы: 2
Cerwin-Vega RPM XMAP-1 User Manual preview
RPM XMAP-1
Бренд: Cerwin-Vega Страницы: 12
Renkforce RF-4886682 Operating Instructions preview
RF-4886682
Бренд: Renkforce Страницы: 4
Black Box PI045A Manual preview
PI045A
Бренд: Black Box Страницы: 20
Link Y/C to NTSC Conversion PCN-40 Specification Sheet preview
Y/C to NTSC Conversion PCN-40
Бренд: Link Страницы: 2
Wirez LCTS-2 Owner'S Manual preview
LCTS-2
Бренд: Wirez Страницы: 16
Celabs MP400A Instruction Manual preview
MP400A
Бренд: Celabs Страницы: 2
X-Micro XMP3-Y Quick Start Manual preview
XMP3-Y
Бренд: X-Micro Страницы: 84
Inter-m NC-900 Operation Manual preview
NC-900
Бренд: Inter-m Страницы: 20
Olive OLIVE O6HD Quick Start Manual preview
OLIVE O6HD
Бренд: Olive Страницы: 31
Waeco PocketPower TSI102 Operating Manual preview
PocketPower TSI102
Бренд: Waeco Страницы: 76
TDK-Lambda CC15-xxxx-Sxx-E Series Instruction Manual preview
CC15-xxxx-Sxx-E Series
Бренд: TDK-Lambda Страницы: 11
Channel Master D2A CM-7000 User Manual preview
D2A CM-7000
Бренд: Channel Master Страницы: 48
B&B Electronics High Speed Asynchronous to Synchronous Converter... User Manual preview
High Speed Asynchronous to Synchronous Converter...
Бренд: B&B Electronics Страницы: 11

Бренды по названию

Популярные бренды

Загрузить еще бренды