Siemens SINAMICS G, Список руководств

Страница: 415 / 700

Internal control/status words
Function diagrams
2-415

Siemens AG 2004 All Rights Reserved
SINAMICS G List Manual, Edition 12.2004
Picture 2-37 2522 – Status word speed controller
- 2522 -
8
7
6
5
4
3
2
1
fp_S01_2522_en.vsd
DO: VECTOR
SINAMICS G
17.12.04
V02.02.00
Internal control/status words - status word, speed controller
1 2 3 4 5 6 7 8 9
10 11
0
Bit No.
12 13 14 15
From the torque setpoint [6060.7]
Speed setpoint, droop [6030.4][6030.5]
From the torque setpoint [6060.7] From the torque setpoint [6060.7]
Sensorless operation
&
[2520.7]
p0115[1] (125.00 µs)
r1407
ZSW n_ctrl
r1407.8 r1407.9 r1407.11 r1407.1
1 = Torque control (closed-loop)
r1406.12
r1407.7
From closed-loop speed control without encoder
From the speed controller [6040.7] From the speed controller [6040.7]
1 = V/f control active
Status word, speed controller
1 = Sensorless operation active 1 = Closed-loop torque control active 1 = Closed-loop speed control active Reserved 1 = Speed controller, I component held 1 = Speed controller, I component set 1 = Torque limit reached 1 = Torque limiting, upper, active 1 = Torque limiting, lower, active 1 = Droop enabled 1 = Speed setpoint limited 1 = Ramp-function generator set Reserved Reserved Reserved
r1407.10 r1407.11 r1407.5 r1407.6 r1407.2
Enable the speed controller from the sequence control [2610.
4
]
From the speed setpoint, droop [6030.3]
From the expanded ramp-function generator [3070.2]
r1407.3 r1407.12
To the speed actual value and rotor position sensing, Motor encoder (encoder 1) [6010.4] To speed setpoint, droop [6030.5] To torque setpoint [6060.3] To the speed controller [6040.8] Ramp-function generator tracking [3080.1] Speed controller [6040.
4
]
Motor locked/stalled [8012.5] To the torque setpoint [6060.7]
Function diagram