4.4.2.3
Controlling several inverters in parallel using electromechanical sensors
You may activate the safety functions of several inverters simultaneously with one or several
series-connected safety sensors.
If there is a risk of cross-circuits or short-circuits, the cables between the sensor and the inverter
must be protected, for example, by routing them in a steel tube.
The inverter supplies the power supply voltage
)',
)',
',
9RXW
',
',
',
',&20
',&20
*1'
6,1$0,&6*
&8(
)',
)',
; ',
; ',
; ',
; ',
; 0
; /
6,1$0,&6*'
)',
; ',
; ',
; 0
; /
6,1$0,&6*0
Figure 4-12 Example for controlling several inverters in parallel with the power supply from the inverter
Installing
4.4 Controlling via a fail-safe digital input
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
68
Function Manual, 01/2017, FW V4.7 SP6, A5E34261271B AD
