Siemens Sinamics Connect Series Скачать руководство пользователя страница 38

Страница: 38 / 101

Connecting

4.2 Connecting the converter to the device

SINAMICS CONNECT

Operating Instructions, 10/2018, A5E45421408

4.2.2

Identifying the converter (optional)

The SINAMICS CONNECT supports port modes of "Auto" and "Manual" which you can set

via the SINAMICS CONNECT Web server. For more information, see Section "Configuring

ports (Page 50)".

●

Auto (default): Press the USER button to identify the converter at the port immediately, or

wait (up to 5 minutes) for the device to identify the converter.

●

Manual: Ignore the step of identifying the converter. In this case you need to set the basic

parameters of the converter manually via the Web server.

Requirement

●

The converter is connected to the device.

●

The device is powered on.

●

The port mode is set to "Auto".

Procedure

Keep pressing the USER button for at least 1 second to identify the converter.

Содержание Sinamics Connect Series






































































































Результаты поиска

Содержание Sinamics Connect Series

Отзывы:

Siemens Sinamics Connect Series, Руководство по эксплуатации, Страница: 38 / 101

Результаты поиска

Содержание Sinamics Connect Series

Отзывы: