Siemens Sinamics Connect Series Скачать руководство пользователя страница 32

Страница: 32 / 101

Connecting

4.1 Connecting the device

SINAMICS CONNECT

Operating Instructions, 10/2018, A5E45421408

NOTICE
Ferrite required at USB cables
The interference immunity of the device according to the data in the technical specifications

is only guaranteed when the cables at USB and micro USB ports are equipped with a ferrite

magnet.

•

Use only USB cables equipped with a ferrite magnet.

4.1.2

Connecting the power supply

Connect the power supply to interface X80 of the device.

Note
The power supply must be adapted to the input data of the device, see Section "General

technical specifications (Page 85)".
For more information about the requirements of power supply, see Chapter "Technical data

(Page 85)".

Requirement

●

You are using the supplied terminal.

●

A two-core cable with a cable cross-section of AWG 18 to 13 (0.75 mm

to 2.5 mm

●

A slotted screwdriver with a 3 mm blade.

Note

•

The power cable is not provided at delivery.

•

Use a copper conductor suitable for temperatures ≤ 75 °C.

Procedure

Switch off the power supply on the device.

Connect the cores of the power supply.

Содержание Sinamics Connect Series






































































































Результаты поиска

Содержание Sinamics Connect Series

Отзывы:

Siemens Sinamics Connect Series, Руководство по эксплуатации, Страница: 32 / 101

Результаты поиска

Содержание Sinamics Connect Series

Отзывы: