Siemens Sinamics Connect Series Скачать руководство пользователя страница 25

Страница: 25 / 101

SINAMICS CONNECT
Operating Instructions, 10/2018, A5E45421408

Mounting

3.1

Preparing for installation

3.1.1

Checking the delivery

Procedure

When accepting a delivery, please check the packaging for visible transport damage.

If any transport damage is present at the time of delivery, lodge a complaint at the

shipping company in charge. Have the shipper confirm the transport damage

immediately.

Unpack the device at its installation location.

Keep the original packaging in case you have to transport the unit again.

NOTICE
Damaged packaging of a device during transport and storage
A damaged packaging indicates that ambient conditions have already had a massive

impact on the device. If a device is transported or stored without packaging, shocks,

vibrations, pressure and moisture may impact the unprotected unit. This may cause

damage to the device.

•

Do not dispose the original packaging.

•

Pack the device during transportation and storage.

Check the scope of delivery for completeness and intactness:
–

One SINAMICS CONNECT device with one DC terminal block mounted

–

Quick Install Guide in English

If the contents of the packaging are incomplete, damaged or do not match your order,

inform the responsible delivery service immediately.

WARNING

Electric shock and fire hazard due to damaged device
A damaged device can be under hazardous voltage and trigger a fire in the machine or

plant. A damaged device has unpredictable properties and states. This may cause

death or serious injury.

•

Make sure that the damaged device is not inadvertently installed and put into

operation.

•

Label the damaged device and keep it locked away.

•

Send off the device for immediate repair.

Содержание Sinamics Connect Series






































































































Результаты поиска

Содержание Sinamics Connect Series

Отзывы:

Siemens Sinamics Connect Series, Руководство по эксплуатации, Страница: 25 / 101

Результаты поиска

Содержание Sinamics Connect Series

Отзывы: