Siemens SIMOTION SCOUT Скачать руководство пользователя страница 27

Страница: 27 / 244

Installation

4.1

SCOUT and SCOUT Standalone system requirements

Minimum requirements of the system

The readme file on the SIMOTION SCOUT DVD contains information on SIMOTION SCOUT

system requirements; alternatively, you can access this information after installation at Start -

> All Programs -> Siemens Automation -> Documentation -> Readmes -> [English].

Note
Simultaneous operation of SIMOTION SCOUT, Starter and SIMATIC S7-Technology on one

PC is not intended and is not possible.
SIMATIC S7-Technology is integrated as of SIMOTION SCOUT V4.0.

4.2

Installing SIMOTION SCOUT

4.2.1

Installing SIMOTION SCOUT

SIMOTION SCOUT is available as software packages with full license and upgrade license.

Requirements:

● SIMATIC STEP 7 is installed.
● You are logged on to the operating system with administrator rights.

Note
Read the readme file and the important information on the SIMOTION SCOUT Add-Ons

DVD contained in the SIMOTION SCOUT software packages.

To install SIMOTION SCOUT

1. Insert the DVD 1 with SIMOTION SCOUT into the CD-ROM drive.
2. Start Windows Explorer and select the CD-ROM drive.
3. Open the root directory on the DVD.
4. Double-click Setup.exe.

SIMOTION SCOUT

Configuration Manual, 11/2016

Содержание SIMOTION SCOUT





















































































































































































































































Результаты поиска

Содержание SIMOTION SCOUT

Отзывы:

Похожие инструкции для SIMOTION SCOUT

Бренды по названию

Популярные бренды

Siemens SIMOTION SCOUT, Руководство по настройке

Результаты поиска

Содержание SIMOTION SCOUT

Отзывы:

Похожие инструкции для SIMOTION SCOUT

Бренды по названию

Популярные бренды