Siemens SIMOTION SCOUT, Руководство по настройке

Страница: 188 / 244

9.7 Trace and measuring functions
9.7.1 Trace, measuring function, and automatic controller setting
Overview
SIMOTION SCOUT provides support for the commissioning and optimization of technology
objects and user programs: The following functions are available:
● Device trace / function generator
● System trace
● Measuring function
● Automatic controller setting
Calling trace and measuring functions
To invoke the trace and measuring functions in SIMOTION SCOUT, proceed as follows:
1. Select the SIMOTION device in the project navigator.
2. Select the Target system command in the menu and select the desired function.
Or click the desired function in the toolbar.
1 2 3 4
①
Device trace / function generator
②
System trace
③
Measuring function
④
Automatic controller setting
Device trace / function generator
You can use the device trace to record and evaluate parameters as well as system and program
variables.
The device trace for system variables is mainly used to analyze time-synchronous sequences
in the real-time system.
An automatic multiple trace is available as of SINAMICS V4.6. It can be used to trigger a
recording automatically according to the trigger conditions. The measurement is stored as a
YDB file (SIMOTION) or ACX file (SINAMICS) in a ring buffer on the memory card. At least
five measurements can be stored in the ring buffer.
You can parameterize the multiple trace on the Trace tab at Save to device (memory card).
Program variables can be traced in order to find logical errors in the execution system or in
user programs. For this purpose, rather than a time-triggered measuring task, an event-
triggered measuring task in the RT system can be used. The event that causes the
measurement recording is the execution of a specific code position in the user program by the
Diagnostics
9.7 Trace and measuring functions
SIMOTION SCOUT
188
Configuration Manual, 11/2016