manualshive.com logo in svg

Siemens SIMOTION SCOUT, Руководство по настройке


Поделиться
Скачать
background image

To replace a SIMOTION device:

1. Double-click the SIMOTION device to be replaced in the project navigator in SIMOTION 

SCOUT. HW Config opens.

2. Open the appropriate folder structure in the hardware catalog:
3. Select the module of the new version in the hardware catalog and drag this above the old 

module with the mouse (to the header of the rack shown in the case of SIMOTION D, to 

slot 2 in the case of SIMOTION C and P).

Note
Ensure that the module/device (SIMOTION D) to be replaced does not get deleted. When 

you change to the new module/device using drag-and-drop, the old module will be updated.

4. Confirm the displayed dialog box with Yes if you want to replace the SIMOTION device.
5. Alternatively, select the SIMOTION device and call the context menu by right-clicking in the 

header area of the device. Then select the Replace object ... command followed by the 

version required.

6. Accept the changes made to the hardware configuration with Station > Save and compile.
7. Close the HW Config.

Note
The data for the SIMOTION device is immediately accepted in the SIMOTION SCOUT 

project and the entire project is saved. In this way, the project also accepts all changes in 

the project (e.g. axis configuration).
If you are using technology packages in your project, these are updated automatically.

If the device replacement is made in the HW Config without open SIMOTION SCOUT, the 

update is made in SIMOTION SCOUT only after the project has been reopened.
The device replacement process differs from the platform replacement process in that it is 

really easy to accept project data during device replacement. Device replacement uses HW 

Config, whereas platform replacement (e.g. replacement involving SIMOTION C and D) 

requires an XML export/import.
Examples of device replacement:
- Replacement involving different power classes (e.g. D445-2 DP/PN <-> D455-2 DP/PN) 
- Replacement involving generations (D4x5 -> D4x5-2)
- Replacement involving variants (D410-2 DP <-> D410-2 DP/PN; C240 <-> C240 PN)
- Replacement involving the main version (C240 V4.1 <-> C240 V4.2)

Upgrade of libraries

When the version of a SIMOTION device and the technology packages changes, the libraries 

created in SIMOTION SCOUT must also be adapted.     
1. Select a library in the project navigator.
2. Right-click and select Properties... in the context menu.

The Object Properties window opens.

Upgrading and project updates
8.2 Upgrading and changing platforms for a SIMOTION device

SIMOTION SCOUT

164

Configuration Manual, 11/2016

Содержание SIMOTION SCOUT





















































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SIMOTION SCOUT

GE 400 Series Installation Instructions preview
400 Series
Бренд: GE Страницы: 2
XOXO Modular IXO Operation Manual And Installation Manual preview
IXO
Бренд: XOXO Modular Страницы: 13
Balboa Water Group BP Series User Interface And Programming Reference Manual preview
BP Series
Бренд: Balboa Water Group Страницы: 28
Sole Diesel SVT 10 Operator'S Manual preview
SVT 10
Бренд: Sole Diesel Страницы: 8
Aaeon COM-KB Manual preview
COM-KB
Бренд: Aaeon Страницы: 76
Daikin BRC1H61W Installation Manual preview
BRC1H61W
Бренд: Daikin Страницы: 46
Daikin BRC1H61W Installation Handbook preview
BRC1H61W
Бренд: Daikin Страницы: 26
Vizio Xrt302 Manual preview
Xrt302
Бренд: Vizio Страницы: 65
SYR 315.2 Instructions For Use preview
315.2
Бренд: SYR Страницы: 2
Maximum Controls MAX ARM Installation And Owner'S Manual preview
MAX ARM
Бренд: Maximum Controls Страницы: 58
Perenio Red Atom PETRA01 Quick Start Manual preview
Red Atom PETRA01
Бренд: Perenio Страницы: 24
turck TBEN-L 8IOL Series Instructions For Use Manual preview
TBEN-L 8IOL Series
Бренд: turck Страницы: 148
Bartec APEXpy 07-37A2-2111/ 520Series Operating Instructions Manual preview
APEXpy 07-37A2-2111/ 520Series
Бренд: Bartec Страницы: 98
PENKO 1020 CAN-RS232-RS422 MFL Manual preview
1020 CAN-RS232-RS422 MFL
Бренд: PENKO Страницы: 29
Anritsu MU120119A Operation Manual preview
MU120119A
Бренд: Anritsu Страницы: 54
Governors America ESD2300 Series Quick Start Manual preview
ESD2300 Series
Бренд: Governors America Страницы: 6
SKF Ecomag Installation, Operation And Maintenance Manual preview
Ecomag
Бренд: SKF Страницы: 11
Quectel EC200A Series Hardware Design preview
EC200A Series
Бренд: Quectel Страницы: 97

Бренды по названию

Популярные бренды

Загрузить еще бренды