Siemens SIMOTION P320-4 E Скачать руководство пользователя

Страница: 77 / 166

Application planning

4.1

Unpacking and checking the delivery

Procedure

1. When accepting a delivery, please check the packaging for visible transport damage.
2. If any transport damage is present at the time of delivery, lodge a complaint at the shipping

company in charge. Have the shipper confirm the transport damage immediately.

3. Unpack the device at its installation location.
4. Keep the original packaging in case you have to transport the device again.

Note
Damage to the device during transport and storage
If a device is transported or stored without packaging, then shocks, vibrations, pressure

and moisture may impact the unprotected device.

A damaged packaging indicates that ambient conditions have already had a massive impact

on the device.
The device may be damaged.
Do not dispose of the original packaging. Pack the device for transport and storage in the

original packaging.

5. Check the contents of the packaging and any accessories you may have ordered for

completeness and damage.

SIMOTION P320-4 E / P320-4 S

Manual, 03/2018, A5E36004933B

Содержание SIMOTION P320-4 E







































































































































































Результаты поиска

Содержание SIMOTION P320-4 E

Отзывы:

Похожие инструкции для SIMOTION P320-4 E

Бренды по названию

Популярные бренды

Siemens SIMOTION P320-4 E, Руководство пользователя

Результаты поиска

Содержание SIMOTION P320-4 E

Отзывы:

Похожие инструкции для SIMOTION P320-4 E

Бренды по названию

Популярные бренды