Siemens SIMOTION P320-4 E Скачать руководство пользователя страница 49

Страница: 49 / 166

Description

3.1

System overview

Overview

SIMOTION P is a PC-based, open Motion Control System from SIMOTION.

Control, motion control, and HMI functions are executed together with standard PC

applications on the SIMOTION P hardware platform. SIMOTION P combines the compatibility

of the Windows operating system with real-time capability of SIMOTION P Runtime.
The fully independent SIMOTION P Runtime runs in parallel to Windows on SIMOTION P.

This real-time expansion makes it possible to implement demanding motion control

applications with high performance requirements on platforms of the SIMOTION P range. The

hardware consists of a computing unit with innovative Intel technology, which is ready for

operation at the time of delivery.
The drives and I/O devices are connected either via PROFINET onboard or

IsoPROFIBUS board (optional).
The SIMATIC Flat Panel IFP1500, IFP1900 and IFP2200 can be used for the operation of the

SIMOTION P320-4 hardware platform in a distributed configuration.

SIMOTION P320-4 versions

The SIMOTION P320-4 can control various I/O systems and HMI components via

PROFINET onboard or the optional IsoPROFIBUS board.

If required, a USB DVD drive can be connected, for example.
The following versions of the SIMOTION P320-4 are available:
● SIMOTION P320-4 E

with the Windows Embedded Standard 7 32-bit operating system and real-time expansion

for SIMOTION.

● SIMOTION P320-4 S

with the Windows 7 Ultimate 32-bit operating system and real-time expansion for

SIMOTION.

Application

The SIMOTION P320-4 applications are directed at machines that require a high level of

integration of PLC, motion control and technology functions on account of the increasing use

of servo drives:
● Packaging machines
● Plastic and rubber processing machines
● Presses, wire-drawing machines
● Textile machines

SIMOTION P320-4 E / P320-4 S

Manual, 03/2018, A5E36004933B

Содержание SIMOTION P320-4 E







































































































































































Результаты поиска

Содержание SIMOTION P320-4 E

Отзывы:

Похожие инструкции для SIMOTION P320-4 E

Бренды по названию

Популярные бренды

Siemens SIMOTION P320-4 E, Руководство пользователя

Результаты поиска

Содержание SIMOTION P320-4 E

Отзывы:

Похожие инструкции для SIMOTION P320-4 E

Бренды по названию

Популярные бренды