Siemens SIMOTICS XP 1MD4 Скачать руководство пользователя страница 21

Страница: 21 / 128

Description

Applications

This electrical machine is designed for driving rotating machines in industrial environments

and also for energy conversion. It is characterized by a high level of safety, long lifetime, and

overall reliability.
The machine was designed in accordance with the ordering party's specification and may only

be used for the contractually agreed purpose.

Explosion protection type (Ex d)

This machine is constructed in the "explosion proof" type of protection (Ex d) in accordance

with IEC / EN 60079‑1. It may therefore be operated in hazardous areas of Zone 1 and 2

according to IEC / EN 60079‑10‑1.

Type of protection Ex tb, Ex tc

This machine has been designed in accordance with the "Protection by enclosure" (Ex t) type

of protection according to IEC / EN 60079‑0 and IEC / EN 60079‑31 . It may therefore be

operated in hazardous areas of Zones 21 and 22 in the Ex tb type of protection and Zone 22

in the Ex tc type of protection according to IEC / EN 60079‑10-2.

Use in hazardous areas

Explosion-proof electrical machines correspond to standards of the IEC / EN 60034 and IEC /

EN 60079 series. Only operate the machine in hazardous areas, strictly complying with the

specifications of the responsible supervisory authority. The relevant supervisory authority is

responsible for determining the hazard level of each area and classifying the zones. The type

of protection as well as special regulations are stamped on the rating plate or in the test

certificate. If the certificate number is supplemented by an X, to safely operate the machine

observe the special notes in the operating instructions or if available in the EC type examination

certificate or in the IECEx Certificate of Conformity. Operation with a converter must be

certified. It is essential that you observe the separate manufacturer's information and

instructions.

SIMOTICS XP 1MD4/1MD5

Operating Instructions 05/2015

Содержание SIMOTICS XP 1MD4

































































































































Результаты поиска

Содержание SIMOTICS XP 1MD4

Отзывы:

Siemens SIMOTICS XP 1MD4, Инструкция по эксплуатации и монтажу, Страница: 21 / 128

Результаты поиска

Содержание SIMOTICS XP 1MD4

Отзывы: