Siemens SIMOTICS XP 1MB5 SH400, Руководство по эксплуатации, Страница: 39 / 166

Protection against humidity
If a dry storage space is not available, protect the machine as follows against humidity:
● Wrap the machine in humidity-absorbent material.
● Wrap the machine in plastic film:
– Place a humidity meter inside the plastic film.
– Place desiccant within the plastic film.
– Pack the machine air-tight.
● Inspect the machine regularly.
4.15.5 Explosion hazard during commissioning, if stored incorrectly
The materials used are specially designed for the temperature range required by the customer.
The relevant temperature limits are specified on the rating plate.
WARNING
Risk of explosion due to damaged sealing materials
Storing the machine at temperatures that do not fall within the specified limits can damage the
material of the seals and cause them to fail. As a result, a potentially explosive gaseous
atmosphere can enter the machine and be ignited during commissioning. Explosions can
occur. This can result in death, serious injury or material damage.
● Do not store the machine in conditions that lie outside the specified temperature limits.
4.16 Converter operation
The following chapter is relevant only if the machine is suitable for converter operation.
Whether the motor is only suitable for line operation or also for converter operation - with or
without filter - is stamped on the rating plate.
4.16.1 Converter parameterization
● If the design of the motor requires connection to a particular converter type, the rating plate
will contain corresponding additional information.
● Correctly parameterize the converter. Parameterizing data can be taken from the machine
rating plates.
You can find parameter data here:
– In the operating instructions for the converter.
– In the SIZER engineering tool
– In the SINAMICS Configuration Manuals.
Preparing for use
4.16 Converter operation
1MB5 SH 400/450
Operating Instructions, 05/2019, A5E45959221A
37