Siemens SIMOTICS M-1PH8, Руководство по эксплуатации

Страница: 150 / 186

Decommissioning and disposal
10.2 Disposal
1PH808/1PH810 main motors
150
Operating Instructions, 04/2017, 610.48004.40f
10.2 Disposal
Protecting the environment and preserving its resources are corporate goals of the highest
priority for us. Our worldwide environmental management system to ISO 14001 ensures
compliance with legislation and sets high standards in this regard. Environmentally friendly
design, technical safety and health protection are always firm goals even at the product
development stage.
Recommendations for the environmentally friendly disposal of the machine and its
components are given below. Be sure to comply with local disposal regulations.
Components
Sort the components for recycling according to whether they are:
● Electronics waste, e.g., sensor electronics
● Iron to be recycled
● Aluminum
● Non-ferrous metal, e.g., motor windings
● Insulating materials
Process materials and chemicals
Sort the process materials and chemicals for recycling according to whether they are:
● Oil
Dispose of the spent oil as special waste in accordance with the spent oil ordinance.
● Grease
● Solvents
● Cleaner solvent
● Paint residues
Do not mix solvents, cleaner solvents and paint residues.
Insulating materials
Electrical insulation materials are mainly used in the stator. Some supplementary
components are made of similar materials and must, therefore, be handled in the same
manner. The insulating materials in question are used on the following items of equipment:
● Various insulators which are used in terminals boxes
● Voltage and current transformers
● Power lines
● Instrument wiring
● Surge arrester
● Capacitors