Siemens Simotics M-1FE1 Series, Руководство по установке оборудования, Страница: 59 / 150

Mechanical mounting
5.3 Mounting/dismantling the rotor
1FE1 synchronous built-in motors
Hardware Installation Manual, 12/2016, 610.43000.40b
59
● Fixture for relieving stress and dismantling
①
Connection hydraulic hand pump
②
Connector nipple
③
Extension tube
④
Slotted nut (only for relieving stress)
⑤
Spacer sleeve (only for relieving stress)
⑥
Non-magnetic fixture (prism)
⑦
Non-magnetic tray
A Dimension for the axial relative movement for dismantling, 90 mm
Figure 5-4 Fixture for relieving stress and dismantling
● Accessories:
–
Connector with nipple (1, 2), e.g. type SKF 1077454
– Extension tube (3), e.g. type SKF1077453
– Non-magnetic fixture (prism, 6)
– Slotted nut (4), spacing sleeve (5)
– Non-magnetic tray (7) for catching oil, e.g. made from aluminum
– Pressure oil for relieving stress, e.g. SKF LHMF 300 (viscosity 300 mm²/s at 20° C)
– Pressure oil for dismantling, e.g. SKF LHDF 900 (viscosity 900 mm²/s at 20° C)
● Balancing machine for balancing the rotor (fine or complete balancing)
● Detergent, e.g. Loctite 7061 or Loctite 7063; bolt locking compound, e.g. Loctite 243