Siemens Simotics M-1FE1 Series, Руководство по настройке

Страница: 36 / 150

Description
2.5 Technical features
SIMOTICS M-1FE1 synchronous built-in motors
34
Configuration Manual, 09/2019, A5E47872980B AA
2.5.2 Technical features
Type of motor Synchronous motor with permanent-magnet excited rotor (4, 6 or 8-pole)
Type of construction Individual components (IM 5110 acc. to IEC 60034-7)
Stator, rotor
Degree of protection IP00 (acc. to DIN IEC 60034, Part 5): Stator, rotor
Cooling Water cooling with T
H2O
= 25 °C (coolant intake temperature) according to EN
60034-1
Standard protection - tempera-
ture monitoring
2 x Pt1000 temperature sensors in the stator winding (of which, 1 x is a reserve)
Full protection (optional) In addition to the standard protection 1 x PTC thermistor triplet (3 sensors in
series)
Can be evaluated, e.g. using a thermal motor protection unit:
Order No.: 3RN2013-1GW30
Universal protection (optional) Full prot NTC PT3-51-F + NTC K227
Winding insulation Temperature class 155 (F) acc. to EN 60034 permits an average winding tempera-
ture rise of 105 K. The power data is valid for a cooling water temperature of +5°
- 25° C.
Balance quality of the rotor (acc.
to ISO 1940-1)
•
Rotor with sleeve:
Depending on the particular version, pre-balanced, balance quality G 2.5
reference speed 3600 rpm or non-balanced for complete balancing after
mounting and installation
• Rotor without sleeve:
Not pre-balanced
Motor voltage
(terminal voltage)
regulated: Maximum 3 AC 430 V
rms
Non-regulated: Maximum 3 AC 460 V
rms
Supply voltage of the SINAMICS
S120 drive system
ALM 400 V → V
DC link
≦ 600 V
SLM 400 V → V
DC link
≦ 600 V
SLM 480 V → V
DC link
≦ 650 V
Note: For ALM 480 V infeed, a change must be made to "Smart Mode opera-
tion".
Type of connection Individual supply cables U1, V1, W1;
length 0.5 m, 1.5 m or 3.5 m
Torque ripple
1FE1 ... -6W
1FE1 ... -8W
1FE1 ... -4W
≦ 1% at 20 rpm and M
N
/2 referred to the rated torque
≦ 1% at 20 rpm and M
N
/2 referred to the rated torque
≦ 2% at 20 rpm and M
N
/2 referred to the rated torque
Note
Technical data is system data, and applicable only in conjunction with the specified
system components (1FE1 built-in motor, SINAMICS S120 drive system, VPM, etc.).