Siemens Simotics M-1FE1 Series, Руководство по настройке, Страница: 23 / 150

SIMOTICS M-1FE1 synchronous built-in motors
Configuration Manual, 09/2019, A5E47872980B AA
21
Description
2
2.1 Use for the intended purpose
WARNING
Danger to life and material damage when incorrectly used
If you do not use the motors correctly, there is a risk of death, severe injury and/or
material damage.
• Only use the motors for their intended purpose.
•
Make sure that the conditions at the location of use comply with all the rating plate
data.
• Make sure that the conditions at the location of use comply with the conditions
specified in this documentation. When necessary, take into account deviations
regarding approvals or country-specific regulations.
WARNING
Danger to life caused by magnetic and electrical fields to persons with active
implants
Electric motors represent a danger for people with active implants who come close to
the motors.
• If you are an affected person, maintain a minimum separation of 500 m m to motors.
If you wish to use special versions and design variants whose specifications vary from
the motors described in this document, then contact your local Siemens office.
If you have any questions regarding the intended usage, please contact your local
Siemens office.
Synchronous built-in motors are components for installation in machines and for
deployment in industrial or business plants.
Any other application of the motor is considered to be incorrect usage.
The observance of the specifications contained in the Hardware Installation Manual and
the Configuration Manual is part of the correct usage.
● Observe the data on the rating plate.
Conditions at the location of use must comply with the specifications on the rating plate.
The 1FE1 is designed for operation in sheltered areas under normal climatic conditions,
such as those found on shop floors.
The 1FE1 is not permitted to be operated in hazardous areas.
1FE1 motors are only certified for converter operation.
Applications
The 1FE1 is a three-phase motor for low voltage.
The motor is predominantly used for machine tool main spindle drives.