Siemens Simotics M-1FE1 Series, Руководство по установке оборудования, Страница: 70 / 150

Mechanical mounting
5.3 Mounting/dismantling the rotor
1FE1 synchronous built-in motors
70
Hardware Installation Manual, 12/2016, 610.43000.40b
Safety measures for dismantling
● Check the pump and accessories for functional safety.
● Operate the pump only with manometer.
● Do not make any changes to the device and its safety equipment.
● Observe the notes contained in the oil press pump operating instructions.
● Wear a face protective mask and closed work clothes.
● Vent the hydraulic system. The oil pressure is built up manually.
● Do not exceed the maximum permissible oil pressure See the following table.
Table 5- 4 Maximum permissible oil pressure
Motor type Maximum oil pressure P
max
[MPa]
1FE105 □ -6W 100
1FE106□ - 6W, 1FE108□ - 6W 1FE109□ -4W,
1FE109□ - 6W 1FE111□ - 6W, 1FE114□ -8W
80
Oil that can be used for dismantling
Viscosity 900 mm
2
/s at 20° C e.g. type LHDF 900
Dismantling
NOTICE
Danger to the environment caused by escaping oil
The forcing of oil can cause oil to escape and result in environmental damage.
•
Catch any escaping oil.
•
Bind the escaping oil with a suitable oil binding agent.
• Dispose of the oil and oil binding agent in accordance with the legal regulations.