Siemens Simotics M-1FE1 Series, Руководство по установке оборудования

Страница: 52 / 150

Mechanical mounting
5.1 Safety instructions
1FE1 synchronous built-in motors
52
Hardware Installation Manual, 12/2016, 610.43000.40b
Identification of dangers using warning and prohibition signs:
Table 5- 1 Warning signs according to ISO 7010 and their meaning
Sign Significance Sign Significance
Warning - magnetic
field
(W006)
Warning - hand injuries
(W024)
Warning for electrical
voltage
(W012)
Warning - hot surface
(W017)
Table 5- 2 Prohibition signs according to ISO 7010 and their meaning
Sign Significance Sign Significance
No access for persons
with pacemakers or
defibrillator implants
(P007)
No access for persons
with metal implants
(P014)
No metal objects or
watches
(P008)
WARNING
Danger to life when lifting and transporting
Incorrect lifting and transport operations, as well as devices and equipment that are
unsuitable or damaged can result in death, severe injury and/or material damage.
• Lifting devices, industrial trucks, and load suspension devices must comply with the
regulations.
•
The maximum capacity of the lifting equipment and the load suspension device must
correspond to the weight of the motor parts (see the rating plate) or of the (partially)
mounted motor spindle.
• Do not attach any additional loads to the lifting equipment.
•
To hoist the motor, use suitable cable-guidance or spreading equipment (particularly if
the motor is equipped with built-on assemblies).
• Fasten the lifting equipment only in the provided threaded holes and never at the
balancing disk.
•
Do not lift and transport the motor with the motor cables.
• Do not stand in the slewing range of hoisting gear or under suspended loads.
•
Observe the country-specific regulations.