Siemens Simotics M-1FE1 Series, Руководство по установке оборудования

Страница: 117 / 150

Connecting
6.2 Electrical connection
1FE1 synchronous built-in motors
Hardware Installation Manual, 12/2016, 610.43000.40b
117
Technical data
Table 6- 3 Technical data VPM
Designation VPM 120 VPM 200
Article number for metric gland 6SN1113-1AA00-1JA1 6SN1113-1AA00-1KA1
Dimensions (H x W x D) [mm] 300 x 150 x 180 300 x 250 x 190
Drive system connection (cable cross-
section)
U3, V3, W3; M50
(max. 50 mm²)
U3, V3, W3; 2 x M50
(max. 2 x 50 mm²)
Motor side connection (cable cross-
section)
U4, V4, W4; M50
(max. 50 mm²)
U4, V4, W4; 2 x M5
(max. 2 x 50 mm²)
Cable lug Crimp-type cable lug M6 Crimp-type cable lug M8
Signaling contact 1 x M16
Max. cable cross-section
1 x NC contact (floating) 24 VDC
≤ 1.5 mm²
1 x NC contact (floating) 24
VDC
≤ 1.5 mm²
Rated current ≤ 3 AC 120 A
eff
≤ 3 AC 200 A
eff
Max. permissible short-circuit current 90 A 200 A
Short-time loading 2 x I
N
for approx. 500 ms 3 x I
N
for approx. 500 ms
Connection length, drive system ≤ 1.5 m ≤ 1.5 m
Connection length, motor side ≤ 50 m ≤ 50 m
Power loss
•
Normal operation
• Short-circuit operation with I
N
approx. 0 W
approx. 360 W (max. 2 min)
approx. 0 W
approx. 1.1 kW (max. 2 min)
Tripping voltage 830 VDC +/- 1% 830 VDC +/- 1%
Degree of protection IP20 IP20
Ambient temperature 0° ... 50° C 0° ... 50° C
Installation altitude 1000 m above sea level
(otherwise power reduction)
1000 m above sea level
(otherwise power reduction)
Vibratory load (according to DIN EN
60721)
Up to 1 g Up to 1 g
Shock load (according to DIN EN 60721) Up to 10 g Up to 10 g
Max. permissible braking duration ≤ 2 min ≤ 2 min
Weight approx. 6 kg approx. 11 kg
Capacity of the drive system with VPM
To ensure in a fault situation that a defined DC-link voltage is not exceeded and the voltage
gain speed is limited, the DC link must have a minimum capacitance.
The DC-link minimum capacitance is calculated using the following equation:
C
DC-link min
[µF] = I
Nmotor
[A] x 33.33
Consider the calculated DC-link capacitance when configuring the system.