Siemens SIMOTICS HT Series, Инструкция по эксплуатации и установке

Страница: 33 / 128

Danger due to induced voltages
Electrical voltages are induced in the stator when rotating the rotor. Touching the stator
connections can result in death or severe physical injury.
● Before starting any work at the machine, carefully ensure that the system is secured to
prevent the rotor accidentally turning in compliance with the regulations.
● If you must rotate the rotor, then ensure that each phase is grounded.
4.11.1.1 Transporting the machine set
Danger if the machine falls
The attachment points on the machine are designed for the weight of the machine only. If a
machine set is lifted and transported at a single machine, this can fracture the attachment
point. The machine or machine set may fall. This can result in death, serious injury or material
damage.
● Do not lift machine sets by attaching lifting tackle to the individual machines.
● Use only the equipment provided, e.g. the openings or lugs on the base plates, for
transporting machine sets. Note the maximum capacity of the lifting lug.
4.11.2 Checking the delivery
The components are assembled on an individual basis. When you take receipt of the delivery,
please check immediately whether the scope of the delivery matches up with the
accompanying documents. Subsequent claims cannot be recognized.
● Report any apparent transport damage to the delivery agent immediately.
● Immediately report any apparent defects/missing components to your contact partner.
These Operating Instructions are part of the scope of delivery; keep them in a location where
they can be easily accessed.
Preparations for use
4.11 Transport
SIMOTICS HT Series HT-direct 1FW4...1......A
Operating Instructions 11/2018
33