Siemens SIMOTICS FD 1LH1, Инструкция по эксплуатации и установке

Страница: 142 / 174

10.2 Ordering spare parts via the Internet
You can use "Spares on Web" to determine the order numbers for motor
spare parts quickly and easily.
Spares on Web (
https://www.sow.siemens.com/ ).
See also
Guide for Spares on Web ( http://support.automation.siemens.com/WW/news/en/25248626 )
Rolling bearings
When ordering rolling bearings, in addition to the bearing identification code, the
supplementary specifying code is also necessary for the bearing version. Both of these codes
are stamped on the lubricant plate and specified in the motor documentation, or can also be
taken from the installed bearings.
Always replace the rolling bearings with the identical bearings.
If insulated rolling bearings are fitted, use insulated rolling bearings of the same type as spare
parts. This will prevent any bearing damage being caused by bearing currents.
10.3 Anti-condensation heating
The anti-condensation heater is mounted directly on the winding. The anti-condensation heater
cannot be removed without causing damage to the winding. A new anti-condensation heater
may only be installed by Siemens Service Center (Page 163) specialists.
Spare parts
10.2 Ordering spare parts via the Internet
SIMOTICS FD 1LH1
142
Operating Instructions 01/2019